IBOX-KNX-LON EOL
IBOX-KNX-LON is LonWorks to KNX Gateway.
5-7 days
IBOX-KNX-LON EOL
- Stock: 5-7 days
- Model: IBOX-KNX-LON
0,00 zł
A proven choice for industrial installations.
Ask for compatibility and model selection.
Additional discounts for registered customers.
Full design package: User manual, CE declaration, CAD, PDF, certificates and test reports
If you're preparing technical documentation or an installation design, you can receive a complete set of design materials for this model. This is a quick way to gather the required documents for audits, acceptance, or project documentation.
- Device User Manual
- CE Declaration of Conformity (EU Declaration of Conformity)
- Mechanical Drawings – CAD (STEP/DWG) or high-quality PDF
- Additional Certificates and Test Reports (if available for the model)
LonWorks to KNX Gateway.
The IntesisBox Gateway has been specially designed to allow bidirectional control and monitoring of all parameters and functionalities of LonWorks devices from a KNX installation.
IntesisBox is a LonWorks device allowing to read/write points of other LonWorks device(s) connected to a LonWorks network, and offering these point's values through its KNX/EIB interface.
Specification:
Terminal wiring (for power supply and low-voltage signals):
- Per terminal: solid wires or stranded wires (twisted or with ferrule):
- 1 core: 0.5mm2 ~ 2.5mm2
- 2 cores: 0.5mm2 ~ 1.5mm2
- 3 cores: not permitted
Ports:
- KNX port: 1x KNX TP1 (EIB) port opto-isolated. Plug-in terminal block (2 poles). TNV-1
- Ethernet port: 1x Ethernet 10BT RJ45
- LON Port: 1x LON (TP-FT/10) (2 poles plug-in screw terminal block). TNV-1
- Console port: EIA232. DB9 female connector (DCE). SELV (also allows configuration and upgrades firmware)
Power:
- Connector: 2 poles plug-in terminal block
- Input Voltage: 9 to 30Vdc +/-10% 125mA; 24Vac +/-10% 50-60Hz, Max.: 127mA
- Must use a NEC Class 2 or Limited Power Source (LPS) and SELV rated power supply
System Control & Monitoring:
- Button: 1x KNX programming; 1x LON service switch
- LED indicators:
- 1x Power
- 2x LON port activity (Tx, Rx)
- 2x KNX port activity (Tx, Rx)
- 1x KNX programming/bus
- 1x LON Service
Mechanical Characteristics:
- Construction: Plastic, type PC (UL 94 V-0)
- Dimensions: 107mm x 105mm x 58mm
- Color: Light Grey. RAL 7035
- Protection: IP20 (IEC60529)
- Mounting:
- Wall
- DIN rail EN60715 TH35
Environmental Characteristics:
- Operation Temperature: -25°C to 70°C
- Humidity: 25% - 90% at 50°C, non condensing
Certifications & Standards:
- CE conformity to EMC directive (2004/108/EC) and Low-voltage directive (2006/95/EC)
- EN 61000-6-2
- EN 61000-6-3
- EN 60950-1
- EN 50491-3
- RoHS conformity: Compliant with RoHS directive (2002/95/CE)
Warranty: 12 months
Ordering Information:
- IBOX-KNX-LON-100 - (100 points and 128 devices)
- IBOX-KNX-LON-A - (500 points and 128 devices)
- IBOX-KNX-LON-B - (4000 points and 128 devices)
