IBOX-LON-KNX EOL
5-7 days
IBOX-LON-KNX EOL
- Stock: 5-7 days
- Model: IBOX-LON-KNX
0,00 zł
A proven choice for industrial installations.
Ask for compatibility and model selection.
Register and get cheaper offers today.
By the same series
5-7 days
Model: IBOX-ASCII-LON
LonWorks to ASCII Gateway. The IntesisBox Gateway has been specially designed to allow bidirectional control and monitoring of all parameters and func..
0,00 zł
5-7 days
Model: IBOX-MBS-LON
LonWorks to Modbus Gateway. The IntesisBox Gateway has been specially designed to allow bidirectional control and monitoring of all parameters and fun..
0,00 zł
Full design package: User manual, CE declaration, CAD, PDF, certificates and test reports
If you're preparing technical documentation or an installation design, you can receive a complete set of design materials for this model. This is a quick way to gather the required documents for audits, acceptance, or project documentation.
- Device User Manual
- CE Declaration of Conformity (EU Declaration of Conformity)
- Mechanical Drawings – CAD (STEP/DWG) or high-quality PDF
- Additional Certificates (if available for the model)
- Test Reports (if available for the model)
KNX to LonWorks Gateway.
The IntesisBox Gateway has been specially designed to allow bidirectional control and monitoring of all parameters and functionalities of a KNX system from a LonWorks installation.
The IntesisBox LON-KNX is a device meant to enable interworking between KNX (TP-1) and LON (TP/FT-10) control networks. This ending is achived by effectively implementing both a Network Variables' (NVs) interface on the LON side and a Communication Objects' interface on the KNX side. Datapoints on either side (NVs at LON or Communication Objects at KNX) are internally bound within the IntesisBox LON-KNX, allowing the information to be moved from KNX to LON and viceversa.
Specification:
Terminal wiring (for power supply and low-voltage signals):
- Per terminal: solid wires or stranded wires (twisted or with ferrule):
- 1 core: 0.5mm2 ~ 2.5mm2
- 2 cores: 0.5mm2 ~ 1.5mm2
- 3 cores: not permitted
Ports:
- KNX port: 1x KNX TP1 (EIB) port opto-isolated. Plug-in terminal block (2 poles) for 12 AWG cable. TNV-1
- Ethernet port: 1x Ethernet 10/100Base-T connector RJ45 (also allows configuration and upgrades firmware)
- LON Port: 1x LON (TP-FT/10) (2 poles plug-in screw terminal block for 12 AWG cable). TNV-1
- Console port: USB Type B female standard connector. SELV (also allows configuration and upgrades firmware)
Power:
- Connector: 2 poles plug-in terminal block
- Input Voltage: 9 to 30Vdc +/-10% 125mA; 24Vac +/-10% 50-60Hz, Max.: 127mA
- Must use a NEC Class 2 or Limited Power Source (LPS) and SELV rated power supply
System Control & Monitoring:
- Button: 1x KNX programming; 1x LON service switch
- LED indicators:
- 1x Power
- 2x LON port activity (Tx, Rx)
- 2x KNX port activity (Tx, Rx)
- 1x KNX programming/bus
- 1x LON Service
Mechanical Characteristics:
- Construction: Plastic, type PC (UL 94 V-0)
- Dimensions: 107mm x 105mm x 58mm
- Color: Grey. RAL 7035
- Protection: IP20 (IEC60529)
- Mounting:
- Wall
- DIN rail EN60715 TH35
Environmental Characteristics:
- Operation Temperature: 0°C to 60°C
- Humidity: 10% ~ 90%, non condensing
Certifications & Standards:
- CE conformity to EMC directive (2004/108/EC) and Low-voltage directive (2006/95/EC)
- EN 61000-6-2
- EN 61000-6-3
- EN 60950-1
- EN 50491-3
- RoHS conformity: Compliant with RoHS directive (2002/95/CE)
Warranty: 12 months
Ordering Information:
- IBOX-LON-KNX-200 - LON - KNX (200 points)
- IBOX-LON-KNX-A - LON - KNX (500 points)
- IBOX-LON-KNX-B - LON - KNX (4000 points)
