INBACHIS064O000 – Hisense VRF to BACnet gateway for up to 64 indoor units

INBACHIS064O000 – Hisense VRF to BACnet gateway for up to 64 indoor units. 

The newer version of this device is IN770AIR00MO000

The INBACHIS064O000 IntesisBox gateway has been specifically designed to enable bidirectional communication and full integration between Hisense VRF air conditioning systems and BACnet IP or BACnet MS/TP networks. This makes it ideal for use in building management systems (BMS), SCADA platforms, PLCs, or any device acting as a BACnet Server or Master.

The gateway connects directly to the communication bus of the outdoor units and enables centralized control over all connected indoor units—up to 64 in total. Not only does it provide access to the main operational parameters such as setpoint temperature, fan speed, and mode, but it also allows for the monitoring of selected internal variables of the outdoor unit, enhancing the capacity for system diagnostics and optimization.

Configuration is carried out using the Intesis MAPS software, a powerful tool that allows custom setup of the device through an intuitive interface. With its auto-scan functionality, MAPS quickly discovers all connected devices in the installation, minimizing commissioning time. The software also features robust diagnostic capabilities that simplify the detection and resolution of any communication errors within the system.

The INBACHIS064O000 gateway is an ideal choice for office buildings, hotels, retail environments, and other commercial applications where HVAC systems need to be integrated into a BACnet-based automation infrastructure. Its wide power input range, compact design, and flexible mounting options make installation simple and efficient.

Specification:

Ports:

• Port A:
• 1x H-Link plug-in screw terminal (orange, 2 poles); 1500VDC isolation
• 1x Reserved screw terminal (green, 2 poles); 1500VDC isolation
• Switch A:
• 1x DIP-Switch for serial EIA485 configuration (reserved for future use)
• Port B:
• 1x Serial EIA232 (SUB-D9 male connector); reserved
• 1x Serial EIA485 screw terminal (3 poles): A, B, SGND; 1500VDC isolation
• Switch B:
• Position 1: ON – 120Ω termination active / OFF – inactive
• Positions 2–3: ON – polarization active / OFF – inactive
• Ethernet: 1x RJ45 10/100 Mbps

Power:

• Connector: 1x plug-in screw terminal block (3 poles)
• Input Voltage: 9 to 36VDC ±10%, max. 140mA; 24VAC ±10% 50–60Hz, max. 127mA
• Recommended: 24VDC

LED indicators:

• 1x Error LED
• 1x Power LED
• 2x Ethernet Link/Speed LEDs
• 2x Port A TX/RX LEDs
• 2x Port B TX/RX LEDs
• 1x Button A status LED
• 1x Button B status LED

Mechanical Characteristics:

• Housing: Plastic, PC (UL 94 V-0)
• Dimensions: 90mm x 88mm x 56mm
• Color: Light grey (RAL 7035)
• Protection class: IP20 (IEC60529)
• Mounting: Wall or DIN rail (EN60715 TH35)

Environmental Characteristics:

• Operating temperature: 0°C to 60°C
• Humidity: 5% to 95%, non-condensing

Warranty: 36 months

Legacy product code: HS-AC-BAC

Need help with configuration or integration? Contact our expert: https://consteel-electronics.com/contact-us