INBACHIT016O000 – Hitachi VRF to BACnet gateway with support for up to 16 indoor units
INBACHIT016O000 is INBACHIT016O000 – Hitachi VRF to BACnet gateway with support for up to 16 indoor units.
5-7 days
INBACHIT016O000 – Hitachi VRF to BACnet gateway with support for up to 16 indoor units
- Stock: 5-7 days
- Model: INBACHIT016O000
0.00 zł
A proven choice for industrial installations.
Ask for compatibility and model selection.
Additional discounts for registered customers.
Full design package: User manual, CE declaration, CAD, PDF, certificates and test reports
If you're preparing technical documentation or an installation design, you can receive a complete set of design materials for this model. This is a quick way to gather the required documents for audits, acceptance, or project documentation.
- Device User Manual
- CE Declaration of Conformity (EU Declaration of Conformity)
- Mechanical Drawings – CAD (STEP/DWG) or high-quality PDF
- Additional Certificates and Test Reports (if available for the model)
INBACHIT016O000 – Hitachi VRF to BACnet gateway with support for up to 16 indoor units.
The newer version of this device is IN770AIR00SO000
The INBACHIT016O000 IntesisBox gateway has been engineered to provide seamless integration between Hitachi VRF systems and BACnet IP or BACnet MS/TP building management networks. It allows full bidirectional communication, enabling centralized control and real-time monitoring of up to 16 indoor units from BMS, SCADA, PLC, or other supervisory systems operating as BACnet Servers or Masters.
The gateway connects directly to the outdoor unit's H-Link communication bus and allows control over all connected indoor units. Besides core functions like mode, fan speed, and setpoint, the gateway also enables access to internal parameters from the outdoor unit. This makes the INBACHIT016O000 a powerful tool for energy optimization, fault diagnosis, and system-level automation.
Configuration is performed using the intuitive Intesis MAPS software, offering drag-and-drop setup, device scanning, and graphical diagnostics. The scan function simplifies deployment by auto-discovering connected units, significantly reducing setup time. Additionally, the built-in diagnostic features enable rapid troubleshooting of communication errors or device faults.
The INBACHIT016O000 is ideal for commercial buildings, hotels, office environments, and industrial facilities where HVAC control needs to be integrated into a BACnet-based automation architecture. Its compact form factor and wide power supply range ensure flexible installation in various technical environments.
Specification:
Ports:
- Port A:
- 1x H-Link plug-in screw terminal (orange, 2 poles), 1500VDC isolated
- 1x Reserved plug-in screw terminal (green, 2 poles)
- Switch A: DIP switch for serial EIA485 (reserved)
- Port B:
- 1x Serial EIA232 SUB-D9 male (not used)
- 1x Serial EIA485 screw terminal (3 poles): A, B, SGND; 1500VDC isolated
- Switch B:
- Position 1: 120Ω termination ON/OFF
- Position 2–3: Polarization ON/OFF
- Console Port: Mini USB 2.0 Type-B, 1500VDC isolated
- USB Port:
- USB 2.0 Type-A compliant
- For flash drives only (max. 150mA)
- No support for external HDDs
Terminal wiring (power and low-voltage signals):
- 1 core: 0.5–2.5 mm²
- 2 cores: 0.5–1.5 mm²
- 3 cores: not permitted
Power:
- Connector: 3-pole screw terminal
- Input voltage: 9–36VDC ±10%, max. 140mA; or 24VAC ±10%, 50–60Hz, max. 127mA
- Recommended supply: 24VDC
LED Indicators:
- Power LED, Error LED
- 2x Ethernet Link/Speed
- 2x Port A TX/RX
- 2x Port B TX/RX
- Button A and Button B indicators
Mechanical:
- Housing: Plastic (PC, UL 94 V-0)
- Dimensions: 56 x 90 x 88 mm
- Color: Light grey (RAL 7035)
- Protection rating: IP20 (IEC60529)
- Mounting: Wall or DIN rail EN60715 TH35
Environment:
- Operating temperature: 0°C to 60°C
- Humidity: 5% to 95%, non-condensing
Warranty: 36 months
Legacy code: HI-AC-BAC
Need help with configuration or system integration? Contact our expert: https://consteel-electronics.com/contact-us