INBACMEB1200000

MBus to BACnet Gateway up to 3000 points and 120 devices.

The INBACMEB1200000 IntesisBox Gateway has been specially designed to allow bidirectional control and monitoring of all parameters and functionalities of M-Bus Meters from a BMS, SCADA, PLC or any other device working as a BACnet client.

Specification:

Ports:

• Port A: 1x MBUS port (Plug-in screw terminal block orange 2 poles)
• Port B:
• 1x Serial EIA232 (SUB-D9 male connector)
• 1x Serial EIA485 Plug-in screw terminal block (3 poles)
• Switch A: 1x DIP-Switch for serial EIA485 configuration: Reserved for future use
• Switch B: 1x DIP-Switch for serial EIA485 configuration:
• Position 1: 120 Ω termination active/inactive
• Position 2-3: Polarization active/inactive
• 1x Ethernet 10/100 Mbps RJ45
• USB Port: 1x Type-A USB 2.0 compliant; Only for USB flash storage device (USB pen drive)
• Console port: Mini Type-B USB 2.0 compliant, 1500VDC isolation

Power:

• Connector: 3 poles plug-in terminal block
• Input Voltage: 9 to 36VDC +/-10%, Max.: 125mA; 24VAC +/-10%, 50-60Hz, Max.: 127mA
• Maximum power consumption at converter start-up: 30W

System Control & Monitoring:

• LED indicators:
• 1x Error LED
• 1x Power LED
• 2x Port A TX/RX
• 2x Port B TX/RX
• 2x Ethernet port (LNK, ACT)
• 1x Button A indicator
• 1x Button B indicator

Mechanical Characteristics:

• Construction: Plastic, type PC (UL 94 V-0)
• Dimensions: 90mm x 88mm x 56mm
• Color: Light Grey. RAL 7035
• Protection: IP20 (IEC60529)
• Mounting:
• Wall
• DIN rail EN60715 TH35

Environmental Characteristics:

• Operation Temperature: 0°C to 60°C
• Humidity: 5% - 95%, non condensing

Warranty: 36 months

The INBACMEB1200000 old device code is IBOX-BAC-MBUS

---