INKNXHIS016O000 – KNX Interface for Hisense VRF Integration (16 Indoor Units)

INKNXHIS016O000 – KNX Interface for Hisense VRF Integration (16 Indoor Units)

Newer version available here: IN770AIR00SO000

The INKNXHIS016O000 Intesis gateway allows for seamless bidirectional control and monitoring of Hisense VRF systems from a KNX building automation network. It enables full interaction with up to 16 indoor units, offering complete access to core air conditioning functions and internal outdoor unit variables.

This gateway connects directly to the outdoor units' communication bus and is fully compatible with KNX TP-1 systems. It ensures centralized control and helps optimize energy usage and comfort levels across the HVAC installation. It supports main features such as power ON/OFF, mode, fan speed, temperature setpoint, and error codes.

Configuration is performed through Intesis MAPS software, which enables device scanning and fast commissioning. With extended diagnostic tools, the system simplifies fault detection and ongoing maintenance. Device templates can be exported and imported for efficient deployment across similar installations.

This gateway is ideal for system integrators looking to enhance compatibility between KNX automation environments and Hisense VRF systems using a standardized and ETS-compatible device.

Technical Specifications

Ports:

• Port A:
  • 1x KNX TP-1 terminal (orange, 2 poles); 2500VDC isolation; 5mA power consumption
  • 1x green terminal block (2 poles); reserved
• Switch A: 1x DIP switch for configuration – reserved
• Port B:
  • 1x Serial EIA232 SUB-D9 male connector – reserved
  • 1x H-Link terminal block (3 poles); 1500VDC isolation
• Switch B: 1x DIP switch – reserved (default: OFF)
• Ethernet: 1x RJ45 10/100 Mbps

Power Supply:

• 1x 3-pole terminal block
• 9–36VDC ±10%, max 140mA; 24VAC ±10%, max 127mA; recommended: 24VDC

LED Indicators:

• 2x Power/Error
• 2x Ethernet Link/Speed
• 2x Port A TX/RX
• 2x Port B TX/RX
• 1x Button A / 1x Button B indicators

Mechanical:

• Material: PC plastic (UL 94 V-0)
• Dimensions: 90 x 88 x 56 mm
• Color: Light Grey (RAL 7035)
• Protection: IP20
• Mounting: Wall or DIN rail (EN60715 TH35)

Environment:

• Operating temp: 0°C to 60°C
• Humidity: 5% – 95%, non-condensing

Warranty: 36 months
Previous device code: HS-AC-KNX

Need support or documentation? Contact our expert:
https://consteel-electronics.com/contact-us