INMBSKNX1000000 – KNX to Modbus TCP/RTU Gateway, 100 points
INMBSKNX1000000 is KNX to Modbus TCP/RTU Gateway, 100 points, temp. 0…+70°C, DIN rail, power 30VDC, cert CE/UL/ROHS.
5-7 days
INMBSKNX1000000 – KNX to Modbus TCP/RTU Gateway, 100 points
- Stock: 5-7 days
- Model: INMBSKNX1000000
0.00 zł
A proven choice for industrial installations.
Ask for compatibility and model selection.
Additional discounts for registered customers.
Full design package: User manual, CE declaration, CAD, PDF, certificates and test reports
If you're preparing technical documentation or an installation design, you can receive a complete set of design materials for this model. This is a quick way to gather the required documents for audits, acceptance, or project documentation.
- Device User Manual
- CE Declaration of Conformity (EU Declaration of Conformity)
- Mechanical Drawings – CAD (STEP/DWG) or high-quality PDF
- Additional Certificates and Test Reports (if available for the model)
Industrial KNX to Modbus TCP/RTU Gateway for 100 Data Points.
The INMBSKNX1000000 is a robust and fully bidirectional gateway designed for seamless integration between KNX installations and Modbus-based control systems. It allows any KNX TP1 (EIB) device or network to be monitored and controlled as if it were part of a Modbus RTU or Modbus TCP environment. This includes PLCs, SCADA systems, and other industrial or building automation solutions.
Supporting both Modbus RTU and Modbus TCP simultaneously, the INMBSKNX1000000 ensures broad compatibility and flexibility. The gateway can handle up to 5 simultaneous Modbus TCP clients and allows mapping up to 100 KNX communication points. Internally, it can support up to 3000 KNX objects, giving integrators maximum control. Its intuitive setup is powered by the Intesis MAPS software, which allows the use of ready-made templates or full custom configuration.
Key Features:
- Fully bidirectional communication between KNX TP1 and Modbus RTU/TCP
- Supports up to 100 Modbus data points (KNX-based)
- Up to 3000 internal KNX communication objects
- Works with up to 5 Modbus TCP clients simultaneously
- Easy to configure with Intesis MAPS software suite
- UL and CE certified, RoHS compliant
Technical Specifications:
Ports:
- Modbus RTU: 1x RS232 (DB9 male DTE), 1x RS485 (2-pole plug-in)
- Modbus TCP: 1x 10BT Ethernet RJ45
- KNX: 1x opto-isolated TP1 port (2-pole screw terminal)
- Console: RS232 DB9 (female DCE, for config and firmware)
Power Supply:
- Connector: 2-pole terminal block
- Input: 9 to 30VDC ±10%, 1.4W or 24VAC ±10%, 1.4VA
System Monitoring:
- 1x KNX programming button
- LEDs: Power, KNX (Tx/Rx), Modbus RTU (Tx/Rx), Ethernet (Link/Act), KNX programming/bus
Mechanical:
- Housing: PC Plastic (UL 94 V-0)
- Dimensions: 107 × 105 × 58 mm
- Color: Light grey (RAL 7035)
- Protection: IP20 (IEC60529)
- Mounting: Wall or DIN rail (EN60715 TH35)
Environmental:
- Operating Temperature: 0°C to +70°C
- Humidity: 5% – 90%, non-condensing
Warranty: 36 months
Certifications: CE, UL, RoHS
Previous model code: IBOX-MBS-KNX
