Menu
Your Cart

PIO-D168U CR

PIO-D168U CR
2-3 weeks
PIO-D168U CR
  • Stock: 2-3 weeks
  • Brand: ICPDAS
  • Model: PIO-D168U CR
1 619,86 zł

Industrial Universal PCI card with 168-channel Digital I/O.

The PIO-D168U card is the new generation product that ICP DAS provides to meet RoHS compliance requirement. The new PIO-D168U card is designed as a drop-in replacement for the PIO-D168, and users can replace the PIO-D168 by the PIO-D168U directly without software/driver modification.

The PIO-D168U universal PCI card supports 3.3 V/5 V PCI bus while the PIO-D168 supports 5 V PCI bus. These cards provide 168 TTL digital I/O lines, and these lines are grouped into eighteen 8-bit bi-direction ports. Every three ports on a connector are grouped and named as port A (PA), port B (PB) and port C (PC) respectively. All ports are configured as inputs upon power-up or reset.

The PIO-D168U also adds a Card ID switch on-board. Users can set Card ID and then recognizes the board by the ID via software when using two or more PIO-D168U cards in one computer.

Features:

  • Support the +5 V PCI bus
  • Double side SMT, short card, power saving
  • Connect directly to DB-24P,DB-24R, DB-24PR, DB-24SSR, DB-24POR and other OPTO-22 compatible daughter board
  • 168 I/O Lines
  • Supports Card ID (SMD Switch)
  • Emulate 7 Industrial standard 8255 PPI ports (mode 0)
  • Programmable interrupt
  • Six 50-pin flat cable connectors & one 37-pin D-sub connector
  • Output status readback
  • DIO response time is about 1 μs (1 MHz)

Manufacturer's warranty: 12 months


Write a review

Note: HTML is not translated!
Bad Good
1

We know that choosing the right product can be difficult. Get a free consultation with a technical expert and make the right decision!

We use cookies to offer you the best experience on our site. By continuing to browse the site, You are agree to use cookies.