WISE-7517M-10 CR

MQTT PoE I/O Industrial Module with 10/20 Analog Inputs and 2-port Ethernet Switch.

WISE-7517M-10 is a module with 10-channel differential or 20-channel single-ended analog inputs. It provides programmable input range on all analog channels. Each analog channel has 240 Vrms high overvoltage protection. Each analog input can be programmed to accept voltage or current as input depending upon the position of corresponding jumper. It also has qualification for 4 kV ESD protection as well as 3000 VDC intra-module isolation. WISE-7517M-10 follows IEEE 802.3af-compliant Power over Ethernet (PoE) specification. It allows receiving power from PoE enabled network by Ethernet pairs. In additional to this, WISE-7517M-10 also has a built-in two-port Ethernet switch to implement daisy-chain topology. The cabling is much easier and total costs of cable and switch are significantly reduced.

By integrating with IF-THEN-ELSE rule engine, WISE-7517M-10 provides powerful functions such as I/O Monitoring/Control, Counter, Timer, Schedule, E-mail sending & CGI Command sending for use in various industrial applications. WISE-7517M-10 also supports Modbus TCP and MQTT protocols to make seamless integration with SCADA, IT and IoT (Internet of Things) system.

Features:

• Runs on browsers, no extra software tool is required
• No more programming, Web pages provided for control logic editing
• IF-THEN-ELSE logic rules execution ability
• Built-in I/O (AI: 10/20 Channels)
• Support I/O Moniitoring/Control, Counter, Timer, Schedule, Email sending and CGI Command sending operations
• Modbus TCP Protocol for SCADA System Integration
• IEEE 802.3af-compliant Power over Ethernet (PoE)
• 2-port Ethernet Switch for Daisy-Chain Topology
• MQTT Protocol for IT & IoT (Internet of Things) System Integration

Manufacturer's warranty: 12 months

Certificates: CE, FCC

---