HD67702-E-0-D5M-D5M

Industrial Ethernet to multi mode fiber optic converter, point to point, redundant double loop & multi-drop, DIN rail mount.

Point-to-Point connection between two devices/networks over optical fiber. Optimal solution to cover a long distance, isolate the two sides and when there is the necessity to pass near noise sources (engines, inductive loads, etc.).

Multi-Drop connection between more converters. This solution consists in a serial connection of more converters, without the mandatory to close the optical fiber system with a loop.

Double Loop or Redundant Loop connection between more converters. This solution ensures the security and the speed of the optical fiber associated with the redundancy of the data. In this way, thanks to the double loop in the optical fiber system, if there is a failure in a loop, the communication will continue to work.

Configuration:

Thanks to the SW67701 software on your PC you can:

• Define the parameters of Ethernet line
• Define the I/O map (if I/O module is present)
• Update the device

Characteristics:

• Triple isolation between Ethernet - Power Supply, Ethernet – Optic Fiber, Power Supply – Optic Fiber
• Bi-directional information exchange between Ethernet and Optic Fiber
• Mountable on 35mm Rail DIN

Specification:

• Ports: 1x Ethernet; 2x Optic Fibers
• Data Rates Ethernet: 10/100 Base-T Autosensing
• Ethernet connector: RJ45
• Optic Fiber connector: SFP (LC connector included)
• Power supply: 9...19VAC; 12...35VDC
• Operating temperature: -40°C to +85°C (-40°F/+185°F)
• Dimensions: 71 mm x 60 mm x 95 mm (DxWxH)
• Weight: 200g approx
• Mechanical fixing: DIN Rail mount
• Software: SW67701
• ORDER CODE: HD67702-E-0-D5M-D5M

---