M-7088D CR
2-3 weeks
8-channel PWM Output and 8-channel High-speed Counter Module using the DCON and Modbus Protocols with LED Display.
The I-7088 provides 8-channel PWM (Pulse Width Modulation) Output and 8-channel Counter Input, and can be used to develop powerful and cost-effective analog control systems. PWM is a powerful technique for controlling analog circuits that uses the Digital Output to generate a waveform with a variable duty cycle and frequency which can then be used to control an analog circuit in applications such as controlling the position or speed of motors, the brightness of lamps, or the speed of fans, etc. Either burst mode or continuous mode can be used for the PWM output depending on the application. In addition, all Digital Input channels can be used as high-speed counters with a speed of up to 1 MHz. The M-7088 supports both the Modbus RTU and the DCON protocols, which can be confi gured via software, and all hardware specifi cations are the same as the I-7088. The I-7088(D)/S and M-7088(D)/S allows the load voltage to be increased from +3.5 to +50 V for the 8-channels PWM (Pulse Width Modulation) output and the 8-channels high-speed counter.
Features:
- 8-channel PWM Output and 8-channel Counter Input
- Burst Mode and Continuous Mode for PWM Output
- Software and Hardware Trigger Mode for PWM Output
- Individual and Synchronous PWM Output
- High-speed Counters
- 4 kV ESD and EFT Protection
- Dual Watchdog
- Wide Operating Temperature Range: -25 ~ +75°C
- DIN rail mount
General technical parameters | |
I/O | 8x counter inputs, 8x PWM outputs |
Protocol support | DCON, Modbus RTU |
Industrial grade | |
Optoisolation | 2500VDC |
Operating temperature | -25°C to 75°C |
Input voltage | 10~30VDC |
Mount | DIN rail, Wall mount |
1
We know that choosing the right product can be difficult. Get a free consultation with a technical expert and make the right decision!
Tags:
7088d
, modbus
, dcon
, ethernet
, icpdas
, M-7088D
, Modbus RTU (RS-485)
, DCON (RS-232/485
, Ethernet)