Menu
Your Cart

MDR-60-24

MDR-60-24
5-10 days
MDR-60-24
  • Stock: 5-10 days
  • Brand: MeanWell
  • Model: MDR-60-24
77,60 zł

60W Single Output Industrial DIN Rail Power Supply.

DIN rail mounted power supply unit with 24VDC output voltage, 60W power, 2.5A output current and fanless cooling.

Check out the Power SUPPLIES

Features:

  • Universal AC input/Full range
  • Protections: Short circuit / Overload / Over voltage
  • Cooling by free air convection
  • Can be installed on DIN rail TS-35/7.5 or 15
  • NEC class 2 / LPS compliant
  • DC OK relay contact
  • 100% full load burn-in test
  • No load power consumption < 0.75W

Specification:

Power supply

  • Output:
    • DC Voltage: 24V
    • Rated Current: 2.5A
    • Current Range: 0 ~ 2.5A
    • Rated Power: 60W
    • Ripple & Noise (max.): 150mVp-p
    • Voltage Adj. Range: 24 ~ 30V
    • Voltage tolerance: +/- 1.0%
    • Line Regulation: +/- 1.0%
    • Load Regulation: +/- 1.0%
    • Setup, Rise Time: 500ms, 30ms/230VAC; 500ms, 30ms/115VAC at full load
    • Hold up time (typical): 50ms/230VAC; 20ms/115VAC at full load
  • Input:
    • Voltage Range: 85 ~ 264VAC; 120 ~ 370VDC
    • Frequency range: 47 ~ 63Hz
    • Efficiency (typical): 88%
    • AC Current (typical): 1.8A/115VAC; 1A/230VAC
    • In Rush Current (typical): Cold Start 30A/115VAC; 60A/230VAC
    • Leakage Current: <1mA / 240VAC

Protection

  • Overload: 105 ~ 150% rated output power
  • Protection type: Constant current limiting, recovers automatically after fault condition is removed
  • Over Voltage: 31.2 ~ 36V
  • Protection type: Shut down o/p voltage, re-power on to recover

Function

  • DC OK Active Signal: Relay contact rating (max.): 30V/1A resistive

Safety & EMC

  • Safety Standards: UL508, TUV EN60950-1 approved, NEC class 2 / LPS compliant (24V only)
  • Withstand Voltage: I/P-O/P:3KVAC; I/P-FG:1.5KVAC; O/P-FG:0.5KVAC
  • Isolation Resistance: I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC/25°C/70% RH
  • EMC Emission: Compliance to EN55011, EN55022 (CISPR22), EN61204-3 Class B, EN61000-3-2,-3
  • EMC Immunity: Compliance to EN61000-4-2, 3, 4, 5, 6, 8, 11, EN55024, EN61000-6-2, EN61204-3, heavy industry level, criteria A

Environmental Characteristics

  • MTBF: 299.200 h
  • Weight: 0,33 kg
  • Dimensions (W x D x H): 40mm x 90mm x 100mm
  • Operation Temperature: -20°C ~ 70°C (Refer to output load derating curve)
  • Storage Temperature: -40°C ~ 85°C
  • Humidity: 20% to 90% while working; 10% to 95% storage
  • Vibration: Component: 10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes; Mounting: Compliance to IEC60068-2-6

Warranty: 36 months

ORDERING INFORMATION: MDR-60-24


General technical parameters
Power 60W
Output current 2.5A
Output voltage 24VDC
Industrial grade
Operating temperature -20°C to 70°C
Input voltage 85~264VAC, 120~370VDC
Manufacturer's warranty 36 months
Mount DIN rail

Write a review

Note: HTML is not translated!
Bad Good

We know that choosing the right product can be difficult. Get a free consultation with a technical expert and make the right decision!

We use cookies to offer you the best experience on our site. By continuing to browse the site, You are agree to use cookies.