WISE-7519ZM/S2 CR

Industrial MQTT PoE I/O Module with 10 Universal Analog Inputs, 3 Digital Outputs, 2-port Ethernet Switch and DN-1822 Daughter Board and a 1.8 m Cable.

WISE-7519ZM is specifically designed for extremely accurate thermocouple measurement and features automatic cold-junction compensation for each channel to ensure temperature output consistency and stable temperature output in the field. Current input and voltage input are both supported. Open thermocouple detection and ESD/ EFT/Surge protection mechanisms are also included. The three digital output channels can be set as alarm outputs. WISE-7519ZM follows IEEE 802.3af-compliant Power over Ethernet (PoE) specification. It allows receiving power from PoE enabled network by Ethernet pairs. In additional to this, WISE-7519ZM also has a built-in two-port Ethernet switch to implement daisy-chain topology. The cabling is much easier and total costs of cable and switch are significantly reduced.

By integrating with IF-THEN-ELSE rule engine, WISE-7519ZM provides powerful functions such as I/O Monitoring/Control, Counter, Timer, Schedule, E-mail sending & CGI Command sending for use in various industrial applications. WISE-7519ZM also supports Modbus TCP and MQTT protocols to make seamless integration with SCADA, IT and IoT (Internet of Things) system.

Features:

• Runs on browsers, no extra software tool is required
• No more programming, Web pages provided for control logic editing
• IF-THEN-ELSE logic rules execution ability
• Built-in I/O (AI: 10 Channels; DO: 3 Channels)
• Support I/O Monitoring/Control, Counter, Timer, Schedule, Email sending and CGI Command sending operations
• Modbus TCP Protocol for SCADA System Integration
• IEEE 802.3af-compliant Power over Ethernet (PoE)
• 2-port Ethernet Switch for Daisy-Chain Topology
• MQTT Protocol for IT & IoT (Internet of Things) System Integration

Manufacturer's warranty: 12 months

Certificates: CE, FCC

---