EIPE-1

Industrial Skorpion PoE Mid-Span Injector with 1 Fast Ethernet port and 1 PoE port.

The EIPE-1 Injector is powered from a 24 VAC/VDC source — eliminating the need and expense of the 48 VDC power supply typically associated with PoE equipment. In many industrial control systems 24 VDC is readily available in the control panel, just like 24 VAC is available in a BAS system. Using its received power, the EIPE-1 internally generates the 48 VDC PoE power for the Powered Device (PD) — eliminating grounded primary power concerns.

With the EIPE-1 powered up, an Ethernet cable is attached to the PD. No power is delivered to the PD until a valid 25 kΩ resistance, called the signature, is sensed by the EIPE-1. Once this value is sensed, the EIPE-1 applies power to the unused pairs and thereby powers the PD. Even if the total cable length is 100 m, the PD receives a minimum of 12.95 watts at its power pins.

Features:

• Fully powers one Powered Device (PD)
• 1 10/100BaseT(X) Ethernet port and 1 10/100BaseT(X) PoE port
• 24 VAC/VDC power input
• Isolated 15.4 W power output
• IEEE 802.af compliant
• DIN-rail mounting
• Rugged metal enclosure

Specification:

Ethernet Communications

• IEEE 802.3 10/100 Mbps data rate
• 10BASE-T, 100BASE-TX physical layer
• 100 m (max) CAT5 cable length total for both cables

LEDs

• Power: Green = power OK
• PoE: Green = being delivered
• Flashing:
• 1 = low signature resistance
• 2 = high signature resistance
• 5 = excessive current
• Off = no power being delivered

Power

• 24 VDC ±10% 21 W or 24 VAC ±10% 38 VA 47–63 Hz

Envrionmental

• Operating temperature: 0°C to 60°C
• Storage temperature: -40°C to 85°C
• Relative Humidity: 10–95%, non-condensing

Mechanical

• Dimensions: 70 mm x 26 mm x 100 mm
• IP protection: IP30
• Mounting: TS-35 DIN Rail

Certificates:

• CE Mark; CFR 47, Part 15 Class A; RoHS
• UL 508; c-UL 508

Manufacturer's warranty: 36 months

---