Menu
Your Cart

EISK8-GT

EISK8-GT
3 year warranty 5-10 days
EISK8-GT
1,142.10 zł
A proven choice for industrial installations.
Ask for compatibility and model selection.
Register and get cheaper offers today.

Full design package: User manual, CE declaration, CAD, PDF, certificates and test reports

If you're preparing technical documentation or an installation design, you can receive a complete set of design materials for this model. This is a quick way to gather the required documents for audits, acceptance, or project documentation.

  • Device User Manual
  • CE Declaration of Conformity (EU Declaration of Conformity)
  • Mechanical DrawingsCAD (STEP/DWG) or high-quality PDF
  • Additional Certificates (if available for the model)
  • Test Reports (if available for the model)
Request a package: User manual, CE declaration, CAD, PDF, certificates, test reports

Industrial Unmanaged Ethernet Switch with 8 Gigabit Ethernet ports.

The EISK8-GT Skorpion Gigabit Switch is a 8-port unmanaged Ethernet switch that provides Gigabit Ethernet (GigE) performance on all ports in order to accommodate high-speed devices such as IP cameras and modern workstations. In addition, GigE jumbo frames up to 9216 bytes are supported for the highest possible system performance. For 10/100 Mbps legacy devices, the switch will automatically reduce its port-speed accordingly, thereby accommodating the needs of just about any Ethernet automation system. This low-cost compact unit utilizes a rugged metal enclosure and is intended for installation in control panels using DIN-rail mounting. This is a plug-and-play Ethernet switch requiring no configuration. All ports automatically configure their data rate and duplex using the Auto-negotiation protocol. Depending on the capability of the link partner, communication is set at 10, 100 or 1000 Mbps and at either half- or full-duplex. Each port will accommodate either a straight-through or crossover cable by using the Auto-MDIX protocol.

The unit is powered from a choice of low-voltages (AC or DC). Redundant power connections are provided for back-up power schemes. LED indicators assist in troubleshooting network issues.

Features:

  • Plug-and-Play operation
  • 8 10/100/1000BaseT(X) Ethernet ports
  • Shielded RJ-45 connectors
  • Auto-negotiation of speed and duplex
  • Auto-MDIX supports cable inversion
  • DIN-rail mounting
  • Rugged metal enclosure
  • 24 VAC/VDC powered

Specification:

Ethernet Communications

  • IEEE 802.3 10/100/1000 Mbps data rate using RJ-45 connectors, 100 m (max)
  • Supports jumbo frames up to 9216 bytes

LEDs

  • Power: Green = power OK
  • "H" LEDs:
    • Green = 1000 Mbps communication established
    • Yellow = 100 Mbps communication established
  • "L" LEDs:
    • Yellow = 10 Mbps communication established
  • "H" or "L" LEDs: Flashing = data transmissions occurring

Power

  • 10–36 VDC 3 W or 24 VAC ±10% 7 VA 47–63 Hz

Envrionmental

  • Operating temperature: 0°C to 60°C
  • Storage temperature: -40°C to 85°C
  • Relative Humidity: 10–95%, non-condensing

Mechanical

  • Dimensions: 100 mm x 41 mm x 95 mm
  • Shipping weight: 0.45 kg
  • IP protection: IP30
  • Mounting: TS-35 DIN Rail

Certificates:

  • CE Mark; CFR 47, Part 15 Class A; RoHS
  • UL 508 Industrial Control Equipment

Manufacturer's warranty: 5 years


General technical parameters
Ethernet8x 10/100/1000BaseT(X)
Industrial grade
CasingMetal
IP ratingIP30
Operating temperature0°C to 60°C
Input voltage24VAC, 24VDC, 10~36VDC
Manufacturer's warranty5 years
MountDIN rail

Write a review

Note: HTML is not translated!
Bad Good
1