2-3 weeks
Industrial Universal PCI card with 168-channel Digital I/O.
The PIO-D168U card is the new generation product that ICP DAS provides to meet RoHS compliance requirement. The new PIO-D168U card is designed as a drop-in replacement for the PIO-D168, and users can replace the PIO-D168 by the PIO-D168U directly without software/driver modification.
The PIO-D168U universal PCI card supports 3.3 V/5 V PCI bus while the PIO-D168 supports 5 V PCI bus. These cards provide 168 TTL digital I/O lines, and these lines are grouped into eighteen 8-bit bi-direction ports. Every three ports on a connector are grouped and named as port A (PA), port B (PB) and port C (PC) respectively. All ports are configured as inputs upon power-up or reset.
The PIO-D168U also adds a Card ID switch on-board. Users can set Card ID and then recognizes the board by the ID via software when using two or more PIO-D168U cards in one computer.
Features:
- Support the +5 V PCI bus
- Double side SMT, short card, power saving
- Connect directly to DB-24P,DB-24R, DB-24PR, DB-24SSR, DB-24POR and other OPTO-22 compatible daughter board
- 168 I/O Lines
- Supports Card ID (SMD Switch)
- Emulate 7 Industrial standard 8255 PPI ports (mode 0)
- Programmable interrupt
- Six 50-pin flat cable connectors & one 37-pin D-sub connector
- Output status readback
- DIO response time is about 1 μs (1 MHz)
Manufacturer's warranty: 12 months
1
We know that choosing the right product can be difficult. Get a free consultation with a technical expert and make the right decision!