2-3 weeks
Ethernet PoE I/O Module with 8 Thermistor Inputs and 4 Isolated Outputs.
WISE-7105 follows IEEE 802.3af-compliant (classification, Class 1) Power over Ethernet (PoE) specification. It allows receiving power from PoE enabled network by Ethernet pairs (Category 5 Ethernet cable). This feature provides greater flexibility and higher efficiency therefore simplifying systems design, saving space, reducing cables and eliminating the requirement for dedicated electrical outlets. Meanwhile, in case under a non-PoE environment, WISE-7105 will still be able to receive power from auxiliary power sources like AC adapters or battery, etc.
WISE-7105 supports Modbus/TCP protocol to make seamless integration with SCADA software available. It features 16-bit, 8-channel Thermistor inputs and 4-channel digital outputs. Each analog channel is allowed to configure an individual range.
Features:
- 1x 10/100 Base-TX Ethernet
- Built-in Web Server for IF-THEN-ELSE rule setting
- Built-in IF-THEN-ELSE rule enigne for logic operation
- Rules, I/O, CGI, Counter, Timer, Email settings edited upon Web browser
- Modbus/TCP Protocol for Integration in SCADA Software
- 8 Thermistor Inputs
- 4 Digital Outputs
- Individual Channel Configuration
- Power over Ethernet (PoE) or external DC power supply unit
- Wide Operating Temperature Range: -25°C ~ +75°C
Manufacturer's warranty: 12 months
Certificates: CE, FCC
General technical parameters | |
Ethernet | 1x 10/100BaseT(X) PoE |
I/O | 8x analog inputs, 4x digital outputs |
Protocol support | Modbus TCP |
Industrial grade | |
Optoisolation | 2500 VDC, 1500 VDC |
Operating temperature | -25°C to 75°C |
Input voltage | 12~48VDC, Port powered |
Mount | DIN rail, Wall mount |
We know that choosing the right product can be difficult. Get a free consultation with a technical expert and make the right decision!