PA-AW2-MBS-1 (INMBSPAN001A000) - Panasonic Air to Water to Modbus Interface
3 year warranty
5-7 days
PA-AW2-MBS-1 (INMBSPAN001A000) - Panasonic Air to Water to Modbus Interface
- Stock: 5-7 days
- Brand: Intesis
- Model: PA-AW2-MBS-1
1,363.00 zł
2 pieces or more 1,294.85 zł
5 pieces or more 1,267.59 zł
10 pieces or more 1,226.70 zł
26 pieces or more 1,158.55 zł
51 pieces or more 1,035.88 zł
A proven choice for industrial installations.
Ask for compatibility and model selection.
Register and get cheaper offers today.
By the same series
3 year warranty
5-7 days
Brand: Intesis
Model: ME-AC-LON-1
Mitsubishi Electric AC units to LonWorks Interface. IntesisBox ME-AC-LON-1 interface allows a complete and natural integration of Mitsubishi Electric ..
1,421.12 zł
Full design package: User manual, CE declaration, CAD, PDF, certificates and test reports
If you're preparing technical documentation or an installation design, you can receive a complete set of design materials for this model. This is a quick way to gather the required documents for audits, acceptance, or project documentation.
- Device User Manual
- CE Declaration of Conformity (EU Declaration of Conformity)
- Mechanical Drawings – CAD (STEP/DWG) or high-quality PDF
- Additional Certificates (if available for the model)
- Test Reports (if available for the model)
Panasonic Air to Water to Modbus Interface.
IntesisBox PA-AW2-MBS-1 (INMBSPAN001A000) (or PAW-AW-MBS-H as per Panasonic reference) allows fully bi-directional communication with PANASONIC Aquearea H Air-to-Water systems. Control and monitor all the functions and parameters of the system from Modbus RTU (RS-485) networks.
The PA-AW2-MBS-1 (INMBSPAN001A000) gateway is wired directly to an indoor unit. This allows not only the control of the main AC functions such as operating mode, fan speed, temperature setpoint…but the monitoring of errors, alarms and some internal variables.
The PA-AW2-MBS-1 (INMBSPAN001A000) can be installed and set up in a really short time. It’s only a matter of wiring the gateway to the AC unit and configure the DIP-SW accordingly. No configuration software and no power supply are required. The consistent Modbus register mapping used for all AC brands, helps improving the integration time of each project.
Specification:
Ports:
- Modbus RTU port:
- 1x Serial EIA485 Plug-in screw terminal block (2 poles): A, B
- Compatible with Modbus RTU EIA-485 networks
- Hydro unit port: 1x Specific connector (Specific cable included)
- Switch 1: 1x DIP-Switch for Hydro Unit features
- Switch 3: 1x DIP-Switch for Modbus RTU settings
- Switch 4: 1x DIP-Switch for extra functions
Mechanical:
- Enclosure: Plastic, type PC (UL 94 V-0)
- Dimensions: 93mm x 53mm x 58mm
- Color: Light Grey. RAL 7035
- Weight: 85g
- Isolation voltage: 1500VDC
- Isolation resistance: 1000 MΩ
- Protection: IP20 (IEC60529)
Environmental:
- Operating temperature: 0°C to 60°C
- Storage temperature: -20°C to 85°C
- Humidity: <90%, non-condensing
Warranty: 36 months
Ordering Information: INMBSPAN001A000
