PA-AC-MBS-1 (INMBSPAN001I100)

Panasonic Etherea AC units to Modbus Interface.

IntesisBox PA-AC-MBS-1 (INMBSPAN001I100) allows monitoring and control, fully bi-directionally, all the functioning parameters of Panasonic Etherea Air Conditioners into Modbus RTU (RS-485) networks.

The PA-AC-MBS-1 (INMBSPAN001I100) gateway is wired directly to an indoor unit. This allows not only the control of the main AC functions such as operating mode, fan speed, temperature setpoint…but the monitoring of errors, alarms and some internal variables.

The PA-AC-MBS-1 (INMBSPAN001I100) can be installed and set up in a really short time. It’s only a matter of wiring the gateway to the AC unit and configure the DIP-SW accordingly. No configuration software and no power supply are required. The consistent Modbus register mapping used for all AC brands, helps improving the integration time of each project.

Features:

• Reduced dimensions
• Quick and easy installation
• External power not required
• Direct connection to MODBUS RTU (EIA485) networks. Up to 63 PA-AC-MBS-1 devices can be connected to the same network
• Direct connection to the AC indoor units
• Configuration from both on-board DIP-switches and Modbus RTU
• Total Control and Supervision
• Real states of the AC unit's internal variables
• Allows using simultaneously the IR remote control and wired remote controls and Modbus RTU

Specifications:

• Dimensions: 93 x 53 x 58 mm
• Weight: 85 g
• Operating Temperature: -40°C ~ 85°C
• Stock Temperature: -40°C ~ 85°C
• Operating Humidity: <95% RH, non-condensing
• Stock Humidity: <95% RH, non-condensing
• Isolation voltage: 1000 VDC
• Isolation resistance: 1000 MΩ
• Modbus Media: Compatible with Modbus RTU - RS485 networks

Manufacturer's warranty: 36 months

---