PA-AW2-MBS-1 (INMBSPAN001A000)

Panasonic Air to Water to Modbus Interface.

IntesisBox PA-AW2-MBS-1 (INMBSPAN001A000) (or PAW-AW-MBS-H as per Panasonic reference) allows fully bi-directional communication with PANASONIC Aquearea H Air-to-Water systems. Control and monitor all the functions and parameters of the system from Modbus RTU (RS-485) networks.

The PA-AW2-MBS-1 (INMBSPAN001A000) gateway is wired directly to an indoor unit. This allows not only the control of the main AC functions such as operating mode, fan speed, temperature setpoint…but the monitoring of errors, alarms and some internal variables.

The PA-AW2-MBS-1 (INMBSPAN001A000) can be installed and set up in a really short time. It’s only a matter of wiring the gateway to the AC unit and configure the DIP-SW accordingly. No configuration software and no power supply are required. The consistent Modbus register mapping used for all AC brands, helps improving the integration time of each project.

Specification:

Ports:

• Modbus RTU port:
• 1x Serial EIA485 Plug-in screw terminal block (2 poles): A, B
• Compatible with Modbus RTU EIA-485 networks
• Hydro unit port: 1x Specific connector (Specific cable included)
• Switch 1: 1x DIP-Switch for Hydro Unit features
• Switch 3: 1x DIP-Switch for Modbus RTU settings
• Switch 4: 1x DIP-Switch for extra functions

Mechanical:

• Enclosure: Plastic, type PC (UL 94 V-0)
• Dimensions: 93mm x 53mm x 58mm
• Color: Light Grey. RAL 7035
• Weight: 85g
• Isolation voltage: 1500VDC
• Isolation resistance: 1000 MΩ
• Protection: IP20 (IEC60529)

Environmental:

• Operating temperature: 0°C to 60°C
• Storage temperature: -20°C to 85°C
• Humidity: <90%, non-condensing

Warranty: 36 months

Ordering Information: IBMBSPAN001A000

---