HD67053-B2-250

Industrial MBus to PROFIBUS converter, master MBus up to 250 slaves, PROFIBUS DP DPV0 support, housing type B (wide), DIN rail mount.

HD67053-B2-250 allow to monitor some MBus meters (like Engelmann, Amber-Wireless, Maddalena, Siemens) with a PROFIBUS net (like an SIEMENES PLC). Converter is easy to install and configure thanks to free SW67053 software.

New converter functionality - automatic scan of MBus receivers

There is no longer need to consult the manufacturer or analyze the protocol frame from the MBus counter - everything will be handled for you our dedicated software SCAN&DECODE!

To facilitate the installation of already easy-to-use ADFweb MBus converters, the manufacturer has developed dedicated software that automatically scans the MBus and decodes all the registers contained in the telegram. In practice, this means fast installation of converters and trouble-free system setup.

SCAN&DECODE - quick manual

We have also provided you with a very brief description of the functionality, which is available for download at the CONSTEEL Electronics store documentation.

Configuration:

Thanks to the SW67053 software on your PC you can:

• Define the parameters of PROFIBUS and MBus lines
• Define the MBus devices on the line and select the desired values
• Create the GSD file to import on your PROFIBUS Master
• Update the device

Characteristics:

• Electrical isolation between PROFIBUS and MBus
• 35mm DIN rail mount

Specifications:

• Ports: 1x MBus; 1x RS-232; 1x PROFIBUS
• Data Rates MBus: Up to 38400 bps
• Data Rates PROFIBUS: Auto baudrate
• MBus Connector: Terminal block
• PROFIBUS Connector: DB9 Female
• Power supply: 15...21VAC; 18...35VDC
• Operating temperature: -40°C/+70°C (-40°F/+158°F)
• Dimensions: 71 mm x 60 mm x 95 mm (DxWxH)
• Weight: 200g approx
• Maximum power consumption at converter start-up: 30W
• Mechanical fixing: DIN Rail mount
• PROFIBUS DP DPV0 support
• Software: SW67053
• ORDER CODE: HD67053-B2-250

Manufacturer's warranty: 24 months

MBus (Meter-Bus) is an European standard for remote reading of wide range of consumption meters. As long as MBus has both physical and application layer in most cases there is a need for external protocol/electrical layer converter to read MBus meter. Converters with MBus interface are used to read the data from gas meters, energy meters, water meters and others.

This series of devices is a protocol converter between PROFIBUS and MBus. They allows to read and write the informations of MBus Slaves devices, on PLC/PC that communicates on PROFIBUS. The converter is Slave at PROFIBUS side and Master at MBus side.