3-4 days
Industrial MBus Wireless to Modbus RTU Slave Converter, housing type B (wide), DIN rail mount. Support up to 250 MBus slaves and 32 MBus wireless slaves, wMBus @ 433MHz, S1&T1 supoprted.
The HD67082-B2-433MHz-250 is a MBus Wireless to Modbus RTU Slave Converter and allows you to monitor some MBus Wireless meters (like Engelmann, Amber-Wireless, Maddalena, Siemens, exc. meters) with a Modbus net (like a PLC, a PC). Converter is easy to install and configure thanks to free software SW67082.
New converter functionality - automatic scan of MBus receivers
There is no longer need to consult the manufacturer or analyze the protocol frame from the MBus counter - everything will be handled for you our dedicated software SCAN&DECODE!
To facilitate the installation of already easy-to-use ADFweb MBus converters, the manufacturer has developed dedicated software that automatically scans the MBus and decodes all the registers contained in the telegram. In practice, this means fast installation of converters and trouble-free system setup.
SCAN&DECODE - quick manual
We have also provided you with a very brief description of the functionality, which is available for download at the CONSTEEL Electronics store documentation.
Configuration:
Thanks to the SW67082 software on your PC you can:
- Define the parameters of MBus and Wireless MBus line
- Define the parameters of Modbus line
- Define which M-Bus variables are readable on Modbus
- Update the device
Characteristics:
- Electrical isolation between Serial and MBus
- Baud Rate and Parity changeable with software
- Available wM-Bus frequency: 169 MHz, 433 MHz or 868 MHz (in relation to the order code)
- 35mm DIN rail mount
Specificactions:
- Ports: 1x MBus Wireless; 1x MBus; 1x RS485
- MBus Wireless protocol: MBus Wireless, S1 & T1 Communication
- MBus protocol: MBus Master
- Modbus protocol: Modbus RTU slave
- MBus Wireless frequency: 433 MHz
- Data Rate MBus: Up to 38400 bit/s
- Data Rate Modbus: Up to 115200 bit/s
- MBus Wireless connector: SMA Female Antenna
- MBus connector: 2-way 5mm terminal block
- Modbus connector: 3-way 5mm terminal block
- Power supply Connector: Terminal Block
- Power supply: 15~21VAC; 18~35VDC
- Maximum power consumption at converter start-up: 30W
- Operating temperature: -40°C to +85°C (-40°F to +185°F)
- Dimensions: 71 mm x 60 mm x 95 mm (DxWxH)
- Weight: 200g approx
- Mechanical fixing: DIN Rail mount
- Software: SW67082
- ORDER CODE: HD67082-B2-433MHz-250
Manufacturer's warranty: 24 months
General technical parameters | |
Serial port | 1x RS-485 |
M-Bus master | up to 250 slaves |
Protocol support | M-Bus Wireless, Modbus RTU, M-Bus |
Wireless | |
Frequency | 433MHz |
M-Bus wireless master | up to 32 slaves |
Industrial grade | |
Operating temperature | -40°C to 85°C |
Input voltage | 15~21VAC, 18~35VDC |
Manufacturer's warranty | 24 months |
Mount | DIN rail |
We know that choosing the right product can be difficult. Get a free consultation with a technical expert and make the right decision!