Menu
Your Cart

INMBSMEB0600000

INMBSMEB0600000
5-7 days
INMBSMEB0600000
  • Stock: 5-7 days
  • Brand: Intesis
  • Model: INMBSMEB0600000
5 189,50 zł

M-Bus to Modbus Gateway for 1500 points and 60 devices.

The INMBSMEB0600000 IntesisBox Gateway has been specially designed to allow bidirectional control and monitoring of all parameters and functionalities of M-Bus Meters from a Modbus BMS, SCADA, PLC or any other device working as a Modbus Master.

The aim of this integration is to make available signals and resources of meters connected to M-Bus, from a Modbus master device or system. For this IntesisBox Modbus Server - M-Bus gateway works, from the Modbus system point of view, acting as a Modbus slave device responding to data polls coming from the Modbus master, and from the M-Bus system point of view acting as an M-Bus master device polling data to the meters, and serving this data to the Modbus side.

Specification:

Terminal wiring (for power supply and low-voltage signals)

  • Per terminal: solid wires or stranded wires (twisted or with ferrule):
    • 1 core: 0.5mm2 ~ 2.5mm2
    • 2 cores: 0.5mm2 ~ 1.5mm2
    • 3 cores: not permitted

Ethernet:

  • 1 x Ethernet 10/100 Mbps RJ45 with LEDs

Port A:

  • 1x M-Bus Plug-in screw terminal block orange (2 poles):
    • 1500VDC isolation from other ports
    • Voltage rating: 36VDC / 210mA
  • 1x Plug-in screw terminal block green (2 poles) - Reserved for future use

Switch A:

  • 1x DIP-Switch for PORT A configuration - resrerved for future use

Port B:

  • 1x Serial EIA232 (SUB-D9 male connector):
    • Pinout from a DTE device
    • 1500VDC isolation from other ports
  • 1x Serial EIA485 Plug-in screw terminal block (3 poles):
    • A, B, SGND (Reference ground or shield)
    • 1500VDC isolation from other ports

Switch B:

  • 1x DIP-Switch for serial EIA485 configuration:
    • Position 1: ON: 120 Ω termination active; Off: 120 Ω termination inactive
    • Position 2-3: ON: Polarization active; Off: Polarization inactive

Console Port:

  • Mini Type-B USB 2.0 compliant
  • Isolation: 1500VDC

USB Port:

  • Type-A USB 2.0 compliant
  • Only for USB flash storage device
  • Power consumption limited to 150mA

Power:

  • Connector: 3 poles plug-in terminal block
  • Input Voltage: 9 to 36VDC +/-10%, Max.: 140mA; 24VAC +/-10% 50-60Hz, Max.: 127mA

Battery:

  • Size: Coin 20mm x 3.2mm
  • Capacity: 3V / 225mAh
  • Type: Manganese Dioxide Lithium

LED indicators:

  • 2x Power/Error
  • 2x Port A TX/RX
  • 2x Port B TX/RX
  • 2x Ethernet port activity (Link, Speed)
  • 1x Button A indicator
  • 1x Button B indicator

Mechanical Characteristics:

  • Construction: Plastic, type PC (UL 94 V-0)
  • Dimensions: 90mm x 88mm x 56mm
  • Color: Light Grey. RAL 7035
  • Protection: IP20 (IEC60529)
  • Mounting:
    • Wall
    • DIN rail EN60715 TH35

Environmental Characteristics:

  • Operation Temperature: 0°C to 60°C
  • Humidity: 5% to 90%, non condensing
  • Maximum power consumption at converter start-up: 30W

Warranty: 36 months


Write a review

Note: HTML is not translated!
Bad Good

We know that choosing the right product can be difficult. Get a free consultation with a technical expert and make the right decision!

We use cookies to offer you the best experience on our site. By continuing to browse the site, You are agree to use cookies.