IBOX-BAC-KNX
5-7 days
BACnet to KNX Gateway.
The IntesisBox Gateway has been specially designed to allow bidirectional control and monitoring of all parameters and functionalities of a KNX installation from a BMS, SCADA or any other device working as a BACnet client.
The aim of this integration is to make accessible KNX system signals and resources from a BACnet/IP based control system or device, as if it was a part of the own BACnet system and vice-versa. For this, the gateway acts as a BACnet/IP Server device in its BACnet interface, allowing other BACnet/IP devices to perform subscription (COV) requests, and also read and write its internal points.
Specification:
Ports:
- BACnet/IP port: 1x Ethernet 10BT RJ45
- KNX (EIB) port: 1x KNX TP1 (EIB) opto-isolated, 2-poles plug-in screw terminal block
- Console port: RS232. DB9 female connector (DCE) (also allows configuration and upgrades firmware)
Power:
- Connector: 2 poles plug-in terminal block
- Input Voltage: 9 to 30Vdc +/-10% 1.4W; 24Vac +/-10% 1.4VA
System Control & Monitoring:
- Button: 1x KNX programming
- LED indicators:
- 1x Power
- 2x KNX port activity (Tx, Rx)
- 2x Ethernet port link and activity (LNK, ACT)
- 1x KNX programming/bus
Mechanical Characteristics:
- Construction: Plastic, type PC (UL 94 V-0)
- Dimensions: 107mm x 105mm x 58mm
- Color: Grey. RAL 7035
- Protection: IP20 (IEC60529)
- Mounting:
- Wall
- DIN rail EN60715 TH35
- RoHS conformity: Compliant with RoHS directive (2002/95/CE)
Environmental Characteristics:
- Operation Temperature: 0°C to 70°C
- Humidity: 5% - 95%, non condensing
Warranty: 36 months
Certifications: CE
Ordering Information:
- IN701KNX1000000 - BACnet Server IP & MS/TP - KNX (100 points)
- IN701KNX2500000 - BACnet Server IP & MS/TP - KNX (250 points)
- IN701KNX6000000 - BACnet Server IP & MS/TP - KNX (600 points)
- IN701KNX1K20000 - BACnet Server IP & MS/TP - KNX (1200 points)
- IN701KNX3K00000 - BACnet Server IP & MS/TP - KNX (3000 points)
