3-4 days
Industrial CANopen to Modbus Slave converter, housing type: A (slim), DIN rail mounting.
HD67502 allows to convert the CANopen protocol into Modbus RTU. In this device it is possible to configure at maximum 64 RPDO and 32 TPDO. It is possible to select from five Modbus Protocol types: Modbus RTU, Modbus ASCII, JBUS, Binary and ASCII. Converter is easy to configure thanks to free SW67502 software.
Configuration:
Thanks to the SW67502 software on your PC you can:
- Define that the SDO of the CANopen are accessible from Modbus
- Define how to update SDO in CANopen from Modbus
- Define that the EMCY of the CANopen are accessible from Modbus
- Define how and which EMCY generated in CANopen can be filtered
- Define which and how the PDO of CANopen are accessible from Modbus
- Update the new configurations of the device
- Save, duplicate, modify, export the configurations
Characteristics:
- Electrical isolation between two buses
- Bi-directional information exchange between CANopen and ModBUS networks
- Mountable on 35 mm DIN rail
- Write/read SDO from ModBUS Word
- Read EMCY and PDO from ModBUS Word
Specifications:
- Ports: 1x RS485; 1x RS232; 1x CANopen
- RS232 connector: D-SUB9
- RS485 connector: Terminal block
- CANopen connector: Terminal block
- Data Rates CANopen: Up to 1Mbps
- Data Rates Modbus: Up to 115200 bps
- Power supply: 8...19VAC; 8...35VDC
- Operating temperature: -40°C to +85°C (-40°F to +185°F)
- Dimensions: 120 mm x 23 mm x 107 mm (DxWxH)
- Weight: 200g approx
- Mechanical fixing: DIN Rail mount
- Software: SW67502
- ORDER CODE: HD67502
Manufacturer's warranty: 24 months
