HD67235-A1

Industrial DeviceNet slave to CAN converter, housing type A (slim), DIN rail mount.

HD67235 allows you to connect a DeviceNet net (for example an Allen-Bradley PLC, etc) with a CAN network in order to exchange the informations between the networks. Converter is easy to configure thanks to free SW67235 software.

Configuration:

Thanks to the SW67235 software on your PC you can:

• Define the parameters of CAN line
• Define the parameters of DeviceNet line
• Define the CAN frames that the gateway can accept
• Define the CAN frames that the gateway sends trough the CAN line
• Define the map of CAN byte that must be written in the DeviceNet array
• Define the map of which DeviceNet bytes must be written in CAN frames
• Update the Firmware and/or the Project

Characteristics:

• Up to 455 bytes in reading and 455 bytes in writing
• 35mm DIN rail mount
• Bi-directional information exchange between CAN bus and DeviceNet bus
• Electrical isolation between two buses
• 7mm Creepage Distance between CAN1 and all other components (power lines, CAN0, RS232) of the board
• CAN0: Used for generic CAN and CAN1: Used for DeviceNet

Specifications:

• Ports: 2x CAN
• Connectors: Terminal Blocks
• Data Rates CAN: Up to 1000 kbps
• Data Rates DeviceNet: Up to 500 bps
• Number of Input Bytes: Up to 455
• Number of Output Bytes: Up to 455
• Power supply: 8~19VAC; 8~35VDC
• Operating temperature: -40°C to 85°C (-40°F to 185°F)
• Dimensions: 120 mm x 23 mm x 107 mm (DxWxH)
• Weight: 200g approx
• Mechanical fixing: DIN Rail mount
• Software: SW67235
• ORDER CODE: HD67235-A1

Configurator - Software SW67235 FREE DOWNLOAD

Manufacturer's warranty: 24 months

---