HD67648-A1-232-485
3-4 days
Industrial Ethernet to Serial Converter, housing type A (slim), DIN rail mount.
HD67648-232-485-A1 allows you to create one or two independents ports RS232 / RS485 / RS422 through the Ethernet (RJ45) connection. Important in this type of product is the installation of 2 LAN ports (RJ45) that can extend an Ethernet line without using the switch. Converter is easy to configure thanks to free SW67648 software.
Configuration:
Thanks to the SW67648 software on your PC you can:
- Define the parameters of Serial line
- Define the parameters of Ethernet line
- Update the Firmware and/or the Project
Characteristics:
- Triple isolation between Serial ports - Power Supply, Serial ports - Ethernet, Power Supply - Ethernet
- Auto-sensing Ethernet 10/100
- Bi-directional information exchange between Ethernet bus and Serial ports
- Mountable on 35mm Rail DIN
Specifications:
- Ports: 2x Ethernet; 1x RS232; 1x RS485
- Data Rates RS232: Up to 115200 bps
- Data Rates RS485: Up to 115200 bps
- RS485 connector: 3way 5mm terminal block
- RS232 connector: 3way 5mm terminal block
- Ethernet connector: RJ45
- Power supply: 8...24VAC; 12...35VDC
- Operating temperature: -40°C to +85°C (-40°F to +185°F)
- Dimensions: 120 mm x 23 mm x 107 mm (DxWxH)
- Weight: 200g approx
- Mechanical fixing: DIN Rail mount
- Software: SW67648
- ORDER CODE: HD67648-232-485-A1
-DB-P-250x250.webp "NP5000-1T-1DI(3IN1)-DB-P")
-1-250x250h.webp "IES615-1F-2D(RS-232)")
-250x250h.webp "INP314T-4DI(3IN1)")
-P-250x250h.webp "NP302T-2D(RS-232)")
-S1-250x250h.webp "NP302T-2D(RS-232)")
-250x250w.webp "NP314T-4D(3IN1)")
-11-250x250w.webp "NP318T-8D(3IN1)")