5-7 days
BACnet to KNX Gateway. KNX - BACnet IP & MS/TP Client, 100 points.
The INKNXBAC1000000 IntesisBox Gateway has been specially designed to allow bidirectional control and monitoring of all parameters and functionalities of BACnet server devices from a KNX installation.
Specification:
Ports:
- BACnet/IP port: 1x Ethernet 10Base-T RJ45
- KNX port: 1x KNX TP1 (EIB) opto-isolated, 2-poles plug-in screw terminal block
- Console port: EIA232. DB9 female connector (DCE), SELV (also allows configuration and upgrades firmware)
Power:
- Connector: 2 poles plug-in terminal block
- Input Voltage: 9 to 30Vdc +/-10%, Max.: 125mA; 24Vac +/-10% 50-60Hz, Max.: 127mA
- Must use a NEC Class 2 or Limited Power Source (LPS) and SELV rated power supply
System Control & Monitoring:
- Button: 1x KNX programming
- LED indicators:
- 1x Power
- 2x KNX port activity (Tx, Rx)
- 2x Ethernet port link and activity (LNK, ACT)
- 1x KNX programming/bus
Mechanical Characteristics:
- Construction: Plastic, type PC (UL 94 V-0)
- Dimensions: 107mm x 105mm x 58mm
- Color: Light Grey. RAL 7035
- Protection: IP20 (IEC60529)
- Mounting:
- Wall
- DIN rail EN60715 TH35
Environmental Characteristics:
- Operation Temperature: 0°C to 70°C
- Humidity: 5% - 95%, non condensing
Certifications:
- RoHS conformity: Compliant with RoHS directive (2002/95/CE)
- CE conformity to EMC directive (2004/108/EC) and Low-voltage directive (2006/95/EC)
- EN 61000-6-2
- EN 61000-6-3
- EN 60950-1
- EN 50491-3
Warranty: 36 months
The INKNXBAC1000000 old device code is IBOX-KNX-BAC
