HD67138-B2
3-4 days
Industrial DeviceNet Slave to Modbus RTU Slave converter, housing type B, DIN rail mount.
HD67138 allows you to connect a DeviceNet Master with a Modbus Master (for example a PLC, HMI, etc.) in order to exchange the informations between the networks. Converter is easy to configure thanks to free SW67138 software.
Configuration:
Thanks to the SW67138 software on your PC you can:
- Define the parameters of Modbus line
- Define the parameters of DeviceNet line
- Define the read/write registers
- Update the Firmware and/or the Project
Characteristics:
- Up to 455 bytes in reading and 455 bytes in writing on DeviceNet side
- Electrical isolation between two buses
- Bi-directional information exchange between the DeviceNet bus and Modbus
- 35mm DIN rail mount
Specifications:
- Ports: 1xRS232; 1xRS485; 1xDeviceNet
- Connector: Terminal Block
- Data Rates Modbus: Up to 115200 bps
- Power supply: 8~19VAC; 8~35VDC
- Operating temperature: -40°C to +85°C (-40°F to +185°F)
- Dimensions: 71x60x95 mm
- Weight: 200g approx
- Mechanical fixing: DIN Rail mount
- Software: SW67138
- ORDER CODE: HD67138-B2
Configurator - Software SW67138 FREE DOWNLOAD
Manufacturer's warranty: 24 months
Tips and inspiration from our blog
28 Jun
0
16 Feb
0
08 Feb
0
16 Feb
0
