Menu
Your Cart

GW-7552 CR

GW-7552 CR
GW-7552 CR
GW-7552 CR
GW-7552 CR
Warranty 12 months 2-3 weeks
GW-7552 CR
GW-7552 CR
GW-7552 CR
GW-7552 CR
GW-7552 CR
  • Stock: 2-3 weeks
  • Brand: ICPDAS
  • Model: GW-7552 CR
1,983.40 zł
2 pieces or more 1,923.90 zł
5 pieces or more 1,864.40 zł
10 pieces or more 1,804.89 zł
26 pieces or more 1,745.39 zł
51 pieces or more 1,685.89 zł
A proven choice for industrial installations.
Ask for compatibility and model selection.
Register and get cheaper offers today.

Full design package: User manual, CE declaration, CAD, PDF, certificates and test reports

If you're preparing technical documentation or an installation design, you can receive a complete set of design materials for this model. This is a quick way to gather the required documents for audits, acceptance, or project documentation.

  • Device User Manual
  • CE Declaration of Conformity (EU Declaration of Conformity)
  • Mechanical DrawingsCAD (STEP/DWG) or high-quality PDF
  • Additional Certificates (if available for the model)
  • Test Reports (if available for the model)
Request a package: User manual, CE declaration, CAD, PDF, certificates, test reports

Industrial PROFIBUS to Modbus Converter.

The GW-7552 Gateway is specially designed for the slave device of PROFIBUS DP protocol. It allows the PROFIBUS master to access the Modbus devices. These Modbus devices may be a PLC, a sensor, ICPDAS M-7000 series modules and so forth. In addition, we also provide the utility software for users to configure the GW-7552. By using this module, users can put their Modbus devices into PROFIBUS network very easily.

Features:

  • Protocol & Hierarchy: DP-V0 Slave
  • Detect transmission rate (9.6 ~ 12000 kbps) automatically
  • 128 bytes max input data length
  • 131 bytes max output data length
  • Support Modbus Master and Slave mode
  • Support Modbus RTU and ASCII format
  • Address 0~126 set by DIP switch or EEPROM
  • Support several kinds of baud rate for COM1 from 2.4 to 115.2 kbps
  • Network Isolation Protection: High Speed iCoupler
  • 3000 VDC isolation protection on PROFIBUS side
  • 4 kV ESD Protection

Manufacturer's warranty: 12 months


General technical parameters
Serial port1x RS-232/422/485
Protocol supportPROFIBUS, Modbus RTU, Modbus ASCII
Industrial grade
Optoisolation3000VDC
Operating temperature-25°C to 75°C
Input voltage10~30VDC
MountDIN rail

Write a review

Note: HTML is not translated!
Bad Good
1