HD67082-B2-868MHz-20

MBus wireless to Modbus RTU slave converter. Support up to 20 MBus slaves, up to 32 M-Bus wireless slaves, wMBus @ 868MHz, S1&T1 supoprted, housing type B (wide), DIN rail mount.

The HD67082-B2-868MHz-20 is a protocol converter between MBus Wireless and Modbus Slave, which communicates on Modbus network using RTU. This kind of configuration allows to monitor MBus Wireless meters with Modbus Master device such as PLC, PC or HMI.

New converter functionality - automatic scan of MBus receivers

There is no longer need to consult the manufacturer or analyze the protocol frame from the MBus counter - everything will be handled for you our dedicated software SCAN&DECODE!

To facilitate the installation of already easy-to-use ADFweb MBus converters, the manufacturer has developed dedicated software that automatically scans the MBus and decodes all the registers contained in the telegram. In practice, this means fast installation of converters and trouble-free system setup.

SCAN&DECODE - quick manual

We have also provided you with a very brief description of the functionality, which is available for download at the CONSTEEL Electronics store documentation.

Configuration:

Thanks to the SW67082 software on your PC you can:

• Define the parameters of MBus and Wireless MBus line
• Define the parameters of Modbus line
• Define which M-Bus variables are readable on Modbus
• Update the device

Characteristics:

• Electrical isolation between Serial and MBus
• Baud Rate and Parity changeable with software
• Available wM-Bus frequency: 169 MHz, 433 MHz or 868 MHz (in relation to the order code)
• 35mm DIN rail mount

Specifications:

• Ports: 1x MBus Wireless: 1x MBus; 1x RS-485
• MBus Wireless protocol: MBus Wireless, S1&T1 communication
• MBus protocol: MBus Master
• Modbus protocol: Modbus RTU slave
• MBus Wireless frequency: 868 MHz
• Data Rate MBus: Up to 38400 bit/s
• Data Rate Modbus: Up to 115200 bit/s
• MBus Wireless connector: SMA Female Antenna
• MBus connector: 2way 5mm terminal block
• Modbus connector: 3way 5mm terminal block
• Power supply: 15...21V AC; 18...35V DC
• Power supply connector: 2way 5mm terminal block
• Operating temperatur: -40°C/+85°C (-40°F/+185°F)
• Dimensions: 71 mm x 60 mm x 95 mm (DxWxH)
• Weight: 200g approx
• Maximum power consumption at converter start-up: 30W
• Mechanical fixing: DIN Rail mount
• Software: SW67082
• ORDER CODE: HD67082-B2-868MHz-20

Manufacturer's warranty: 24 months

MBus (Meter-Bus) is an European standard for remote reading of wide range of consumption meters. As long as MBus has both physical and application layer in most cases there is a need for external protocol/electrical layer converter to read MBus meter. Converters with MBus interface are used to read the data from gas meters, energy meters, water meters and others.

---