2-3 weeks
Ethernet PoE I/O Module with 7-channel RTD Input with 3-wire RTD lead resistance elimination.
WISE-7115 follows IEEE 802.3af-compliant (classification, Class 1) Power over Ethernet (PoE) specification. It allows receiving power from PoE enabled network by Ethernet pairs (Category 5 Ethernet cable). This feature provides greater flexibility and higher efficiency therefore simplifying systems design, saving space, reducing cables and eliminating the requirement for dedicated electrical outlets. Meanwhile, in case under a non-PoE environment, WISE-7115 will still be able to receive power from auxiliary power sources like AC adapters or battery, etc.
WISE-7115 supports Modbus/TCP protocol to make seamless integration with SCADA software available. It features 16-bit, 7-channel RTD inputs. Each channel is allowed to configure an individual range that supports 3-wire RTD lead resistance elimination and open wire detection for RTD measurement.
Features:
- 1x 10/100 Base-TX Ethernet
- Built-in Web Server for IF-THEN-ELSE rule setting
- Control Logic Engine with 36 IF-THEN-ELSE rules
- Rules, I/O, CGI, Counter, Timer, Email settings edited upon Web browser
- Modbus/TCP Protocol for Integration in SCADA Software
- 7 RTD (Pt100, Pt1000, Ni120, Cu100, Cu1000) input channel
- 3-wire RTD Input with Lead Resistance Elimination
- Individual Channel Configuration
- Power over Ethernet (PoE) or external DC power supply unit
- Wide Operating Temperature Range: -25°C ~ +75°C
Manufacturer's warranty: 12 months
Certificates: CE, FCC
General technical parameters | |
Ethernet | 1x 10/100BaseT(X) PoE |
I/O | 7x analog inputs |
Protocol support | Modbus TCP |
Industrial grade | |
Optoisolation | 1500 VDC, 2500 Vrms |
Operating temperature | -25°C to 75°C |
Input voltage | 12~48VDC, Port powered |
Mount | DIN rail, Wall mount |
1
We know that choosing the right product can be difficult. Get a free consultation with a technical expert and make the right decision!