LC-101DIN CR

1-channel AC Digital Input and 1-channel Relay Output Lighting Control Module with DIN rail mount.

The LC-101 is an easy-to-use lighting control module that requires no specialist skills to install and operate, and no software is needed in order to control the DO channels. The LC-101 provides 1 channel for digital input (photo couple isolation) and 1 channel for relay output. The output channel is form C type relay, while the input channel is based on a sink-type using a wire connection. The input channel can directly control the relay ON and OFF sequence without requiring a remote host controller. 4 kV ESD protection and 5000 Vrms intra-module isolation are also provided.

When required, communication with the LC-101 is programmable based on the Modbus RTU protocol, and an added benefit is that different addresses can be set for Modbus RTU communication via hardware configuration.

Features:

• Cost-effective solution for lighting control
• 1-channel Power Relay Output (max 5A @ 30VDC - 250 VAC)
• 1-channel Isolated AC Digital Input
• Tiny form-factor with DIN rail mount
• Relay control from external (Modbus/DCON commands) or internal source (digital input)
• Low power consumption
• 1 RS-485 Port (RJ11 Connector) with DCON/Modbus RTU protocol
• Wide Operating Temperature Range: -25 ~ +75°C

---