IN775FGL00MO000 – Fujitsu VRF to KNX, Modbus, BACnet Gateway
IN775FGL00MO000 is a gateway for Fujitsu VRF units that enables bi-directional control and monitoring of up to 64 indoor units and 12 outdoor units,
- Stock: 5-7 days
- Brand: Intesis
- Model: IN775FGL00MO000
Full design package: User manual, CE declaration, CAD, PDF, certificates and test reports
If you're preparing technical documentation or an installation design, you can receive a complete set of design materials for this model. This is a quick way to gather the required documents for audits, acceptance, or project documentation.
- Device User Manual
- CE Declaration of Conformity (EU Declaration of Conformity)
- Mechanical Drawings – CAD (STEP/DWG) or high-quality PDF
- Additional Certificates and Test Reports (if available for the model)
Fujitsu VRF Gateway for Home Automation (64 IU).
The IN775FGL00MO000 interface is designed to provide seamless integration of Fujitsu VRF systems with smart home automation solutions. This powerful gateway enables bi-directional control and monitoring of up to 64 indoor units and 12 outdoor units, allowing centralized management of climate systems directly from KNX, Modbus, BACnet, or IP-based home automation platforms.
By connecting directly to the communication bus of outdoor units, the gateway supports automatic scanning and identification of VRF devices in the network. This makes commissioning and setup fast and reliable. The device supports Intesis MAPS software for easy configuration and updates, while also allowing for remote management and diagnostics through the local IP network.
Key Features
- UL Certified for industrial-grade reliability
- Direct access to the VRF outdoor unit communication bus
- Auto-scan functionality for unit identification
- Energy monitoring and signal status from outdoor units
- Integration-ready for IP-based smart home systems via open ASCII protocol
- Compatible with Intesis drivers and firmware tools
- Simultaneous support for up to 6 TCP clients (incoming sockets)
- Intuitive configuration through USB or Ethernet (console)
- Automatic software updates for MAPS and device firmware
Technical Specifications
Protocols and Ports:
- EIA-485: Supports BACnet MS/TP and Modbus RTU
- KNX: KNX TP1 (twisted pair) bus support
- Ethernet:
- For communication: BACnet/IP, Modbus TCP, ASCII
- As console port: PC configuration access
Power Supply:
- Connector: 3-pin screw terminal
- Input: 12–36 VDC ±10% (Max 250 mA), 24 VAC ±10% (Max 127 mA)
- Recommended: 24 VDC
Physical Attributes:
- Housing: Plastic (UL 94 V-0 compliant)
- Dimensions: 90 × 106 × 58 mm
- Color: Light Grey (RAL 7035)
- Protection: IP20 (IEC60529)
Installation:
- Wall mount: M3 screws (25 mm)
- DIN rail: EN60715 TH35 (recommended)
Environmental:
- Temperature range: 0°C to 60°C
- Humidity: 5%–95%, non-condensing
Warranty:
36 months manufacturer's warranty
Need more details or help integrating this device? Contact our experts.
