TO-RC-MBS-1 (INMBSTOS001R000)

Toshiba VRF and Digital systems to Modbus Interface.

IntesisBox TO-RC-MBS-1 (INMBSTOS001R000) allows monitoring and control, fully bi-directionally, functioning parameters of Toshiba VRF and Digital Air Conditioners into Modbus RTU (RS-485) networks.

The TO-RC-MBS-1 (INMBSTOS001R000) gateway is wired directly to an indoor unit. This allows not only the control of the main AC functions such as operating mode, fan speed, temperature setpoint…but the monitoring of errors, alarms and some internal variables.

The TO-RC-MBS-1 (INMBSTOS001R000) can be installed and set up in a really short time. It’s only a matter of wiring the gateway to the AC unit and configure the DIP-SW accordingly. No configuration software and no power supply are required. The consistent Modbus register mapping used for all AC brands, helps improving the integration time of each project.

Features:

• Reduced dimensions
• Quick and easy installation
• External power not required
• Mountable on DIN rail, wall, or even inside the indoor unit in some models of AC
• Direct connection to MODBUS RTU (EIA485) networks
• Direct connection to the AC indoor unit
• TO-RC-MBS-1 is a Modbus slave device
• Configuration from both on-board DIP-switches and MODBUS RTU
• Total Control and Supervision
• Real states of the AC unit's internal variables
• Allows using simultaneously the control panel and MODBUS RTU

Specification:

• Dimensions: 93 x 53 x 58 mm
• Weight: 85 g
• Operating Temperature: -40°C to 85°C
• Stock Temperature: -40°C to 85°C
• Operating Humidity: <95% RH, non-condensing
• Stock Humidity: <95% RH, non-condensing
• Isolation voltage: 1000 VDC
• Isolation resistance: 1000 MΩ
• Modbus Media: Compatible with Modbus RTU - RS485 networks

Manufacturer's warranty: 36 months

---