HD67086-IP-B2-169MHz-250

Industrial MBus Wireless to BACnet IP Slave Converter, housing type B (wide), DIN rail mount. Support up to 250 MBus slaves and up to 32 MBus wireless slaves, wMBus @ 169MHz, N1&N2 supoprted.

HD67086-IP-B2-169MHz-250 allow to monitor some MBus Wireless meters (like Engelmann, Amber-Wireless, Maddalena, Siemens, exc. meters) with a BACnet net (like a Supervisory System exc). Converter is easy to install and configure thanks to free software SW67086.

New converter functionality - automatic scan of MBus receivers

There is no longer need to consult the manufacturer or analyze the protocol frame from the MBus counter - everything will be handled for you our dedicated software SCAN&DECODE!

To facilitate the installation of already easy-to-use ADFweb MBus converters, the manufacturer has developed dedicated software that automatically scans the MBus and decodes all the registers contained in the telegram. In practice, this means fast installation of converters and trouble-free system setup.

SCAN&DECODE - quick manual

We have also provided you with a very brief description of the functionality, which is available for download at the CONSTEEL Electronics store documentation.

Configuration:

Thanks to the SW67086 software on your PC you can:

• Define the parameters of Wireless MBus and MBus line
• Define the parameters of BACnet line
• Define which MBus variables are readable on BACnet
• Update the device

Characteristics:

• Electrical isolation between Ethernet and MBus
• Baud Rate and Parity (for MBus on wire) changeable with software
• Available Wireless MBus frequency: 169 MHz, 433 MHz or 868 MHz (in relation to the order code)
• 35mm DIN rail mount

Specificactions:

• Ports: 1x MBus Wireless; 1x Ethernet; 1x MBus
• MBus Wireless protocol: MBus Wireless, N1&N2 communication
• MBus protocol: MBus Master
• BACnet protocol: BACnet IP slave
• MBus Wireless frequency: 169 MHz
• Data Rate MBus: Up to 38400 bit/s
• Data Rate BACnet: 10/100 Base-T Autosensing
• MBus Wireless connector: SMA Female Antenna
• MBus connector: 5mm terminal block
• BACnet connector: RJ45
• Power supply Connector: Terminal Block
• Power supply: 15~21VAC; 18~35VDC
• Maximum power consumption at converter start-up: 30W
• Operating temperature: -40°C to +85°C (-40°F to +185°F)
• Dimensions: 71 mm x 60 mm x 95 mm (DxWxH)
• Weight: 200g approx
• Mechanical fixing: DIN Rail mount
• Software: SW67086
• ORDER CODE: HD67086-IP-B2-169MHz-250

Manufacturer's warranty: 24 months

---