I-7520 CR
2-3 weeks
Industrial Isolated RS-232 to RS-485 Converter.
Most industrial computer systems provide standard RS-232 serial ports. Though widely accepted, RS-232 has limited transmission speed, range, and networking capabilities. The RS-422 and RS-485 standards overcome these limitations by using differential voltage lines for data and control signals, which transparently converts RS-232 signals into isolated RS-422 or RS-485 signal with no need to change any hardware or software. The I-7520/I-7520A lets you easily build an industrial grade, long-distance communication system using standard PC hardware.
The design of the isolation between the I-7520 and the I-7520R/AR is different. If the user wants to supply power from the PLC/PC, the I-7520R/AR should be used, otherwise the isolation will be broken. Refer to the I-7000 bus converter manual for detailed information.
Features:
- RS-232 to RS-485 converter
- Automatic Baudrate detection, 300~115200 bps
- 3000 VDC galvanic isolation protection on the RS-232 or RS-485 side
- ESD Protection for the RS-232/422/485 Data Line
- Power Input voltage: +10 ~ +30 VDC
- Supports Operating Temperatures from -25 °C ~ +75 °C
- DIN-Rail Mounting
Manufacturer's warranty: 12 months
General technical parameters | |
Serial port | 1x RS-232, 1x RS-485 |
Industrial grade | |
Optoisolation | 3000VDC |
Casing | Plastic |
Operating temperature | -25°C to 75°C |
Input voltage | 10~30VDC |
Mount | DIN rail |
1
We know that choosing the right product can be difficult. Get a free consultation with a technical expert and make the right decision!