HD67682-IP-A1
3-4 days
Industrial BACnet IP slave to Ethernet/IP slave converter, housing type: A (slim), DIN rail mount.
HD67682 allows you to connect a BACnet Master net with an EtherNeIP net (for example an OMRON PLC, an Allen-Bradley PLC, etc) in order to exchange the informations between the networks. Converter is easy to configure thanks to free SW67682 software.
Configuration:
Thanks to the SW67682 software on your PC you can:
- Define the parameters of BACnet line
- Define the parameters of EthernetIP line
- Define BACnet objects that contains the data sent by EthernetIP
- Define BACnet objects that contains the data to sent to the EthernetIP
- Update the device
Characteristics:
- Up to 2000 BACnet objects (Read+Write)
- Up to 496 bytes in reading and 496 bytes in writing for EthernetIP
- Isolation between Ethernet - Power Supply
- Bi-directional information exchange between BACnet bus and EthernetIP
- Mountable on 35mm Rail DIN
Specifications:
- Ports: 2x Ethernet
- EtherNetIP protocol: EtherNet IP Slave
- BACnet protocol: BACNet IP Slave
- Data Rates EtherNetIP: 10/100 Base-T autosensing
- Data Rates BACnet: 10/100 Base-T Autosensing
- EtherNet IP connector: RJ45
- BACnet connector: RJ45
- Power supply: 8...24V AC; 12...35V DC
- Power supply connector: 2way 5mm terminal block
- Operating temperature: -40°C to +85°C (-40°F to +185°F)
- Dimensions: 120 mm x 23 mm x 107 mm (DxWxH)
- Weight: 200g approx
- Mechanical fixing: 35mm DIN Rail mount
- Software: SW67682
- ORDER CODE: HD67682-IP-A1
Configurator – Software SW67682 FREE DOWNLOAD
General technical parameters | |
Ethernet | 2x 10/100BaseT(X) |
Protocol support | BACnet IP, Ethernet IP |
Industrial grade | |
Operating temperature | -40°C to 85°C |
Input voltage | 8~24VAC, 12~35VDC |
Manufacturer's warranty | 24 months |
Mount | DIN rail |
1
We know that choosing the right product can be difficult. Get a free consultation with a technical expert and make the right decision!