NBACPAN001R100- Panasonic to BACnet gateway

Industrial gate with the Panasonic ECOi and PACi system to the BACnet MSTP interface

Panasonic-BACnet gateway enables fully bidirectional communication between Panasonic ECOi and PACi and BACnet MSTP networks.

Features:

• The BTL mark ensures full interoperability with BACnet devices
• Only supports BACnet MS/TP
• Configuration via built-in DIP switches
• Quick and easy installation (connect and set DP-SW)
• No external power required
• Simultaneous air conditioning control using the manufacturer's remote control and the BACnet MSTP protocol
• Possibility of mounting on a DIN rail, wall or even inside the indoor unit in some air conditioner models
• Abstraction of properties and functionality of air conditioning units as permanent BACnet objects
• The busy function saves energy. The costs associated with HVAC systems in a building are some of the highest, and these types of features help reduce them
• Total control and monitoring of the air conditioning unit via the BACnet protocol, including internal variables of the air conditioning unit, operating hours counter (for filter maintenance checks) and error indication

Specification:

Ports:

• BACnet MS/TP: 1 x EIA485 screw connector (2 GND poles) with 120 Ω resistor termination and switchable polarity

Insulation voltage:

• 1500 VDC

Appearance:

• Housing: Plastic, type PC (UL 94 V-0)
• Dimensions: 93 x 53 x 58 mm
• Color: Light gray. RAL 7035
• Protection rating: IP20 (IEC60529)

Installation:

• Wall

• DIN EN60715 TH35 rail

Environmental:

• Operating temperature: 0°C to 70°C
• Humidity: 5% - 95%, non-condensing

Warranty: 36 months