5-10 days
Fieldbus extender for DeviceNet with optic fiber cabling.
The EXTEND-A-BUS Series can extend DeviceNet up to six kilometers-linking individual DeviceNet subnets together into a single larger network.
Each EXTEND-A-BUS unit creates a DeviceNet subnet and at least two units are needed to link subnets together. The data rate on each subnet can differ from those of other subnets. DeviceNet identifiers or MAC IDs cannot be duplicated on any of the subnets. Each EXTEND-A-BUS pair is best viewed as an extension cord. A unit does not consume a permanent MAC ID, therefore it is transparent to the network.
The backbone side of the EXTEND-A-BUS must adhere to standard ARCNET® cabling rules. Companion AI ARCNET active hubs are available for extending the backbone cabling. Hubs are cascaded to achieve the maximum distance: up to 6 km when using coaxial cabling and ten active hubs or up to 4.8 km when using a fiber optic backbone and two active hubs.
Features:
- Extends the length of DeviceNet™ networks up to 6 km
- Fully DeviceNet compliant
- Fiber optic or coaxial cabling
- Star, bus or distributed-star topology
- Variable data rates up to 500 kbps
- Low-voltage AC- or DC-powered
- Panel-mount or DIN-rail mount
Specification:
Power
- Input voltage: 10~36VDC/8~24VAC
- Input power: 4W DC/ 4VA AC
- Input frequency: N/A DC/47~63MHz AC
Environmental
- Operating temperature: 0°C to 60°C
- Storage temperature: -40°C to 85°C
Functionality
- Data latency: 1ms typical per bridge pair
DeviceNet Port Specifications:
Compliance
- DeviceNet Volume 1, Release 2.0
Data rate
- 125 kbps
- 250 kbps
- 500 kbps
LEDs
- CAN status
- Module/network status
Transceivers
- Optically isolated 82C251
Cable
- DeviceNet Thick
Connectors
- 5 position
- Open-pluggable
Maximum segment or subnet distance
- 125 kbps: 500m
- 250 kbps: 250m
- 500 kbps: 100m
Maximum number of nodes per segment
- 64
Terminating resistor
- 121 ohms
Backbone Port Specifications:
Compliance
- ARCNET ANSI/ATA 878.1
Data rate
- 2.5 Mbps
LEDs
- Link status
- Reconfiguration/activity status
Transceivers
- FOG model: 850 nm duplex fibre optic
Cable
- FOG model: 62.5/125 µm duplex fibre optic
Connectors
- FOG model: ST™
Maximum segment or subnet distance
- FOG model: 1830m
Maximum number of nodes per segment
- FOG model: N/A
Terminating resistor
- FOG model: N/A
Manufacturer's warranty: 24 months
Certificates: CE Mark; CFR 47, Part 15 Class A
Industrial grade | |
Operating temperature | 0°C to 60°C |
Input voltage | 10~36VDC, 8~24VAC |
Manufacturer's warranty | 24 months |
1
We know that choosing the right product can be difficult. Get a free consultation with a technical expert and make the right decision!
Tags:
devicenet
, dnet
, fiber
, j1939
, contemporary
, controls
, EB/DNET-FOG
, to fiber
, to CAN
, J1939 & DeviceNet
, CAN / DeviceNet