2-3 weeks
Industrial Intelligent Modbus RTU to CAN Converter.
The I-7530A-MR is designed to unleash the power of CAN bus via RS-232/485/422 communication method. It accurately converts messages between CAN and RS-232/485/422 networks. This module let you communicate with CAN devices easily from any PC or devices with RS-232/485/422 interface. The programmable RS-232/485/422 device (For example: PC, PLC or PAC) or Modbus RTU master device can use the serial port to connect to the CAN network via the I-7530A-MR.
Features:
- Fully compatible with ISO 11898-2 standard
- Programmable CAN bus baud rate from 10 kbps to 1 Mbps or user-defined baud rate
- Support CAN bus acceptance filter configuration
- Support firmware update via RS-232
- Provide utility tool for module setting and CAN bus communication testing
- Built-in jumper to select 120Ω terminator resistor
- CAN buffer: 128 data frames ; UART buffer: 256 bytes
- Power, data flow and error indicator for CAN and UART status
- Hardware Watchdog design
- Convert CAN message to specific ASCII command string (Normal mode)
- Convert specific ASCII command string to CAN message (Normal mode)
- Provide the transparent communication between the RS-232/485/422 devices via CAN bus (Pair-connection mode)
- Support function code 0x03/0x04/0x10 of Modbus RTU command for reading and writing CAN message (Modbus RTU mode)
Manufacturer's warranty: 12 months
General technical parameters | |
CAN ports | 1x CAN |
Serial port | 1x RS-232/422/485 |
Protocol support | CAN, Modbus RTU |
Industrial grade | |
Optoisolation | 3000VDC |
Operating temperature | -25°C to 75°C |
Input voltage | 10~30VDC |
Mount | DIN rail |
1
We know that choosing the right product can be difficult. Get a free consultation with a technical expert and make the right decision!