HD67140-A1
3-4 days
Industrial DeviceNet Slave to Modbus TCP Slave converter, housing type A (slim), DIN rail mount.
HD67140 allows you to connect a DeviceNet Master net (for example an ABB PLC, etc.) with a Modbus TCP Master (for example a PLC, SCADA System, etc.). Converter is easy to configure thanks to free SW67140 software.
Configuration:
Thanks to the SW67140 software on your PC you can:
- Define the parameters of Modbus TCP line
- Define the parameters of DeviceNet line
- Define the read/write registers
- Update the Firmware and/or the Project
Characteristics:
- Up to 455 bytes in reading and 455 bytes in writing on DeviceNet side
- Electrical isolation between two buses
- Bi-directional information exchange between the DeviceNet bus and Modbus TCP
- 35mm DIN rail mount
Specifications:
- Ports: 1x Ethernet; 1x CAN
- Modbus TCP Connector: RJ45
- Power Supply Connector: Terminal Block
- Power supply: 8~19VAC; 8~35VDC
- Operating temperature: -40°C to +85°C (-40°F to +185°F)
- Dimensions: 120x23x107
- Weight: 200g approx
- Mechanical fixing: DIN Rail mount
- Software: SW67140
- ORDER CODE: HD67140-A1
Configurator - Software SW67140 FREE DOWNLOAD
Manufacturer's warranty: 24 months
Tips and inspiration from our blog
28 Jun
0
16 Feb
0
08 Feb
0
16 Feb
0
