2-3 weeks
EtherCAT Single-Strand Media Converter, TX 1310 nm, RX 1550 nm, SC connector.
The ECAT-2511-A and ECAT-2511-B are EtherCAT to single-mode fiber optic converter. They are designed not only to convert EtherCAT signals to optical signals on a fiber optic cable, to reshape the EtherCAT signal to compensate for distortion, but to isolate the bus error due to the wire short or disturbance. With the advantage of fiber optic, the ECAT-2511-A and ECAT-2511-B enable secure data transmission via fiber optic transmission, and helps the EtherCAT network to prevent the noise from EMS/RFI interference.
Features:
- Powerful MCU handles efficient network traffic
- Distance between Stations up to 25 km (100BASE-FX)
- 50% Cost Saving for Fiber Optic Infrastructures
- EtherCAT conformance test tool verified
- ESD Protection 4 KV Contact for each port
Manufacturer's warranty: 12 months
General technical parameters | |
EtherCAT | 1x EtherCAT |
Fiber mode | Single-mode |
Fiber | 1x 10/100Base-FX |
Protocol support | EtherCAT |
Industrial grade | |
Operating temperature | -25°C to 75°C |
Input voltage | 12~48VDC |
Mount | DIN rail |
1
We know that choosing the right product can be difficult. Get a free consultation with a technical expert and make the right decision!
Tags:
converters
, fiber
, ethercat
, ecat
, gateways
, optic
, indutrial
, ethernet
, cctv
, process
, control
, icpdas
, ECAT-2511-A
, Converters & gateways
, Fiber optic converters
, EtherCat
, to fiber
, to EtherCat
, Indutrial Ethernet & CCTV
, BMS & process control