HD67807-KNX-B2
3-4 days
Industrial Ethernet IP slave to KNX converter, housing type B (wide), DIN rail mount.
HD67807 is an Ethernet IP to KNX converter and it allows to connect Ethernet IP devices like Allen-Bradley PLC or ABB robots with KNX net to exchange informations between the networks. Converter is very easy to configure through free SW67807 software.
Configuration:
Thanks to the SW67807 software on your PC you can:
- Define the parameters of EthernetIP line
- Define the parameters of KNX line
- Define the KNX messages that the Converter can accept
- Define the KNX frames that the Converter sends through the KNX line
- Define the map of KNX byte that must be written in the EthernetIP side
- Define the map of which EthernetIP data must be written in KNX messages
- Update the device
Characteristics:
- Up to 500 bytes in reading and 500 bytes in writing
- Triple isolation between KNX - Power Supply, KNX - EthernetIP, EthernetIP - Power Supply
- Bi-directional information exchange between KNX bus and EthernetIP bus
- Mountable on 35mm Rail DIN
Specifications:
- Ports: 1x KNX; 1x Ethernet
- KNX protocol: KNX TP
- Ethernet protocol: Ethernet/IP slave
- Data Rates KNX: 9600 bit/s
- Data Rates Ethernet: 10/100 Base-T Autosensing
- KNX connector: KNX Bus connector
- Ethernet connector: RJ45
- Power supply: 8...24VAC; 12...35VDC
- Power supply connector: 2way 5mm terminal block
- Operating temperature: -40°C to +85°C (-40°F to +185°F)
- Dimensions: 71 mm x 60 mm x 95 mm (DxWxH)
- Weight: 200g approx
- Mechanical fixing: 35mm DIN Rail mount
- Software: SW67807
- ORDER CODE: HD67807-KNX-B2
Configurator – Software SW67807 FREE DOWNLOAD
Tips and inspiration from our blog
28 Jun
0
16 Feb
0
08 Feb
0
16 Feb
0
