3-4 days
Industrial BACnet IP slave to KNX TP converter, housing type B (wide), DIN rail mount.
HD67802 allows you to connect a BACnet Master net (for example a PC, a Supervisory System, etc) with a KNX net (for example light switches, actuators, etc) in order to exchange the informations between the networks. Converter is easy to configure thanks to free SW67802 software.
Configuration:
Thanks to the SW67802 software on your PC you can:
- Define the parameters of BACnet line
- Define the parameters of KNX line
- Define BACnet data that the converter reads/writes
- Update the device
Characteristics:
- Up to 1440 bytes in reading and 1440 bytes in writing
- Triple isolation between KNX - Power Supply, KNX - BACnet, BACnet - Power Supply
- Bi-directional information exchange between KNX bus and BACnet bus
- Mountable on 35mm Rail DIN
Specifications:
- Ports: 1x KNX; 1x Ethernet
- KNX protocol: KNX TP
- BACnet protocol: BACNet IP slave
- Data Rates KNX: 9600 bit/s
- Data Rates BACnet: 10/100 Base-T Autosensing
- KNX connector: KNX Bus connector
- BACnet connector: RJ45
- Power supply: 8...24VAC; 12...35VDC
- Power supply connector: 2way 5mm terminal block
- Operating temperature: -40°C to 85°C (-40°F to +185°F)
- Dimensions: 71 mm x 60 mm x 95 mm (DxWxH)
- Weight: 200g approx
- Mechanical fixing: 35mm DIN Rail mount
- Software: SW67802
- ORDER CODE: HD67802-KNX-BIP-B2
Configurator – Software SW67802 FREE DOWNLOAD
Tips and inspiration from our blog
28 Jun
0
16 Feb
0
08 Feb
0
16 Feb
0
