Mbus to RS232 converter, max 40 meters - HD67021-B2-40

Industrial MBus to RS232 converter, master Mbus up to 40 slaves, housing type B (wide), DIN rail mount.

This series allows to read/write MBus Slaves by RS-232, ensuring galvanic isolation between MBus and RS-232. HD67021 is a configurable device with logic inside and it allows to connect up to 40 MBus Slaves to RS-232. Converter is easy to configure thanks to free SW67021 software.

Configuration:

Thanks to SW67021 software on your PC you can:

• Define the communication parameters of the M-Bus
• Define the communication parameters of the RS232/RS485
• Update Firmware

Characteristics:

• Galvanic isolation between Serial / M-Bus, Serial / Power Supply, M-Bus / Power Supply
• Baud Rate and Parity changeable with software
• Mountable on 35mm DIN Rail

Specifications:

• Ports: 1x RS-232; 1x MBus; 1x Ethernet (programming port)
• Data Rates MBus: Up to 38400 bps
• Data Rates Serial: Up to 115200 bps
• MBus connector: 2way 5mm terminal block
• RS-232 connector: 3way 5mm terminal block
• Power supply: 15...21VAC; 18...35VDC
• Operating temperature: -40°C/+70°C (-40°F/+158°F)
• Dimensions: 106 mm x 60 mm x 95 mm (DxWxH)
• Weight: 200g approx
• Mechanical fixing: DIN Rail mount
• Software: SW67021
• Maximum power consumption at converter start-up: 30W
• ORDER CODE: HD67021-B2-40

Configurator - Software SW67021 FREE DOWNLOAD

Manufacturer's warranty: 24 months

MBus (Meter-Bus) is an European standard for remote reading of wide range of consumption meters. As long as MBus has both physical and application layer in most cases there is a need for external protocol/electrical layer converter to read MBus meter. Converters with MBus interface are used to read the data from gas meters, energy meters, water meters and others.