MBus to USB converter for up to 250 meters - HD67024-B2-250

Industrial MBus to USB converter, master MBus up to 250 slaves, DIN rali mount, housing type B (wide), DIN rail mount.

This series allows to read/write MBus Slaves by USB, ensuring galvanic isolation between MBus and USB. HD67024 is a configurable device with logic inside and it allows to connect up to 250 MBus Slaves to USB. Converter is easy to configure thanks to free SW67024 software.

Configuration:

Thanks to SW67024 software on your PC you can:

• Define the communication parameters of USB
• Define the communication parameters of MBus
• Update Firmware

Characteristics:

• Galvanic isolation between USB and MBus
• Baud Rate and Parity changeable with software
• Mountable on 35mm DIN Rail

Specifications:

• Ports: 1x MBus Master; 1x USB
• Data Rates MBus: Up to 38400 bps
• MBus Connector: Terminal block
• USB Connector: Type B
• Power supply: 15...21V AC; 18...35V DC
• Operating temperature: -40°C/+70°C (-40°F/+158°F)
• Dimensions: 71 mm x 60 mm x 95 mm (DxWxH)
• Weight: 200g approx
• Maximum power consumption at converter start-up: 30W
• Mechanical fixing: DIN Rail mount
• Software: SW67024
• ORDER CODE: HD67024-B2-250

Configurator - Software SW67024 FREE DOWNLOAD

Manufacturer's warranty: 24 months

MBus (Meter-Bus) is an European standard for remote reading of wide range of consumption meters. As long as MBus has both physical and application layer in most cases there is a need for external protocol/electrical layer converter to read MBus meter. Converters with MBus interface are used to read the data from gas meters, energy meters, water meters and others.