HD67058-B2-20

Industrial MBus Master to DeviceNet Converter, Master MBus up to 20 slaves, housing type B (wide), DIN rail mount.

HD67058-B2-20 allow to monitor some MBus meters (like Engelmann, Amber-Wireless, Maddalena, Siemens, exc. meters) with a DeviceNet net (like an Allen-Bradley PLC exc). Converter is easy to install and configure thanks to free software SW67058.

New converter functionality - automatic scan of MBus receivers

There is no longer need to consult the manufacturer or analyze the protocol frame from the MBus counter - everything will be handled for you our dedicated software SCAN&DECODE!

To facilitate the installation of already easy-to-use ADFweb MBus converters, the manufacturer has developed dedicated software that automatically scans the MBus and decodes all the registers contained in the telegram. In practice, this means fast installation of converters and trouble-free system setup.

SCAN&DECODE - quick manual

We have also provided you with a very brief description of the functionality, which is available for download at the CONSTEEL Electronics store documentation.

Configuration:

Thanks to the SW67058M software on your PC you can:

• Define the parameters of MBus line
• Define the parameters of DeviceNet line
• Define which M-Bus variables are readable on DeviceNet
• Update the device

Characteristics:

• Electrical isolation between DeviceNet and MBus
• Baud Rate and Parity changeable with software
• 35mm DIN rail mount

Specificactions:

• Ports: 1x MBus; 1x RS232; 1x DeviceNet
• Data Rates MBus: Up to 38400 bps
• MBus Connector: Terminal block
• Power supply: 15...21V AC ; 18...35V DC
• Operating temperature: -40°C ~ +70°C
• Dimensions: 106x58x95 (DxWxH)
• Weight: 200g approx
• Maximum power consumption at converter start-up: 30W
• Mechanical fixing: 35mm DIN Rail mount
• Software: SW67058
• ORDER CODE: HD67058-B2-20

Configurator - Software SW67058 FREE DOWNLOAD

Manufacturer's warranty: 24 months

---