IBOX-BAC-MBUS

MBus to BACnet Gateway.

The IntesisBox Gateway has been specially designed to allow bidirectional control and monitoring of all parameters and functionalities of M-Bus Meters from a BMS, SCADA, PLC or any other device working as a BACnet client.

Specification:

Ports:

• Port A: 1x MBUS port (Plug-in screw terminal block orange 2 poles)
• Port B:
• 1x Serial EIA232 (SUB-D9 male connector)
• 1x Serial EIA485 Plug-in screw terminal block (3 poles)
• Switch A: 1x DIP-Switch for serial EIA485 configuration: Reserved for future use
• Switch B: 1x DIP-Switch for serial EIA485 configuration:
• Position 1: 120 Ω termination active/inactive
• Position 2-3: Polarization active/inactive
• 1x Ethernet 10/100 Mbps RJ45
• USB Port: 1x Type-A USB 2.0 compliant; Only for USB flash storage device (USB pen drive)
• Console port: Mini Type-B USB 2.0 compliant, 1500VDC isolation

Power:

• Connector: 3 poles plug-in terminal block
• Input Voltage: 9 to 36VDC +/-10%, Max.: 125mA; 24VAC +/-10%, 50-60Hz, Max.: 127mA
• Maximum power consumption at converter start-up: 30W

System Control & Monitoring:

• LED indicators:
• 1x Error LED
• 1x Power LED
• 2x Port A TX/RX
• 2x Port B TX/RX
• 2x Ethernet port (LNK, ACT)
• 1x Button A indicator
• 1x Button B indicator

Mechanical Characteristics:

• Construction: Plastic, type PC (UL 94 V-0)
• Dimensions: 90mm x 88mm x 56mm
• Color: Light Grey. RAL 7035
• Protection: IP20 (IEC60529)
• Mounting:
• Wall
• DIN rail EN60715 TH35

Environmental Characteristics:

• Operation Temperature: 0°C to 60°C
• Humidity: 5% - 95%, non condensing

Warranty: 36 months

Ordering Information:

• INBACMEB0100000 - 250 points and 10 devices
• INBACMEB0200000 - 500 points and 20 devices
• INBACMEB0600000 - 1500 points and 60 devices
• INBACMEB1200000 - 3000 points and 120 devices

---