INKNXMEB0100000

M-Bus to KNX Gateway- 250 points and 10 devices.

The INKNXMEB0100000 IntesisBox IBOX-KNX-MBUS Gateway has been specially designed to work as a translator between an M-BUS installation and a KNX home automation system. IntesisBox acts as a master in the M-BUS line, retrieving data from all configured meters and exposing them to the KNX TP-1 line in the shape of standardized KNX objects.

Specification:

Ports:

• Port A:
• 1x KNX TP-1 Plug-in screw terminal block orange (2 poles); 2500VDC isolation from other ports; KNX power consumption: 5mA; Voltage rating: 29VDC
• 1x Plug-in screw terminal block green (2 poles); Reserved for future use
• Switch A:
• 1x DIP-Switch for PORT A configuration: Reserved for future use
• Port B:
• 1x Serial EIA232 (SUB-D9 male connector); Reserved for future use
• 1x M-BUS Plug-in screw terminal block (3 poles); MBUS power consumption: 210mA; Voltage rating: 36VDC
• Switch B:
• 1x DIP-Switch for PORT B configuration: Reserved for future use
• Ethernet: 1x Ethernet 10/100 Mbps RJ45

Power:

• Connector: 1x Plug-in screw terminal block (3 poles)
• Input Voltage: 24VDC
• Maximum power consumption at converter start-up: 30W

LED indicators:

• 2x Run (Power)/Error
• 2x Ethernet Link/Speed
• 2x Port A TX/RX
• 2x Port B TX/RX
• 1x Button A indicator
• 1x Button B indicator

Mechanical Characteristics:

• Construction: Plastic, type PC (UL 94 V-0)
• Dimensions: 90mm x 88mm x 56mm
• Color: Light Grey. RAL 7035
• Protection: IP20 (IEC60529)
• Mounting:
• Wall
• DIN rail EN60715 TH35

Environmental Characteristics:

• Operation Temperature: 0°C to 60°C
• Humidity: 5% - 95%, non condensing

Warranty: 36 months

The INKNXMEB0100000 old code of devices is IBOX-KNX-MBUS

---